BTS70082EPAXUMA1 vs BTS70041EPZXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS70082EPAXUMA1 par Infineon et BTS70041EPZXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTS70082EPAXUMA1 - 2x 8mΩ 7.5A Smart High-Side Switch | Infineon PROFET
BTS70082EPAXUMA1 ✓ Actif
Comparaison des spécifications
| Paramètre | BTS70082EPAXUMA1 | BTS70041EPZXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,05 | $1,05 |
| Product Family | PROFET+2 (12 V, dual channel) | — |
| Switch Type | High-side N-channel MOSFET switch | High-Side N-Channel Power Switch (1:1) |
| Number of Channels | 2 | 1 |
| On-Resistance (RDS(on)) per channel | 16 mΩ typical (8 mΩ channel-on resistance per channel pair) | — |
| Continuous Load Current per channel | 7.5 A | — |
| Nominal Supply Voltage | 12 V | — |
| Operating Supply Voltage Range | 3.1 V to 28 V | — |
| Load Dump / Transient Tolerance | 42 V per ISO 7637-2 | — |
| Reverse Battery Protection | -16 V | — |
| Standby Current | [DATA_NEEDED: standby current uA] | — |
| Current Sense (IS) Ratio kILIS | 5000 (typical) | — |
| Protection Features | Overtemperature shutdown, overcurrent, short to ground, short to VS, open load, ground loss | — |
| Diagnostic Output | Current-sense (IS) pin, analog/digital | DEN pin (digital/analog fault feedback) |
| Température de jonction en fonctionnement | -40 °C to +150 °C | — |
| Boîtier | PG-TSDSO-14-22 (TSSOP-14 EP, 14-pin thermal-pad SMD) | PG-TDSO-14-11 (14-pin, exposed thermal pad) |
| AEC-Q100 Qualification | Yes (Automotive Grade) | — |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | MSL3 (per JEDEC J-STD-020) | MSL 2A (4 weeks) |
| Statut RoHS | Compliant | Compliant |
| Manufacturer | — | Infineon Technologies AG |
| Series | — | PROFET®+2 (Automotive, AEC-Q100) |
| Maximum Continuous Load Current | — | 15 A |
| Operating Voltage Range (Vbb) | — | 3.1 V to 28 V |
| Reverse Battery Robustness | — | -28 V on Vbb |
| On-State Resistance R_DS(on) | — | [DATA_NEEDED: R_DS(on) typical in mΩ] |
| Current Limitation | — | Active, with latch clear via DEN pulse |
| Overtemperature Protection | — | Yes (thermal shutdown with auto-restart) |
| Short-Circuit Protection | — | Yes (current-limit and latch) |
| Input Pin (IN) | — | Logic-level control, 3.3 V / 5 V compatible |
| Operating Temperature Range (TJ) | — | -40 °C to +175 °C |
| Qualification | — | AEC-Q100 (automotive grade) |
| Packaging | — | Tape & Reel |