BTS70082EPAXUMA1 vs BTS70121EPAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS70082EPAXUMA1 par Infineon et BTS70121EPAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTS70082EPAXUMA1 - 2x 8mΩ 7.5A Smart High-Side Switch | Infineon PROFET
BTS70082EPAXUMA1 ✓ Actif
Comparaison des spécifications
| Paramètre | BTS70082EPAXUMA1 | BTS70121EPAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,05 | $1,05 |
| Product Family | PROFET+2 (12 V, dual channel) | PROFET+2 (Protected FET) |
| Switch Type | High-side N-channel MOSFET switch | N-Channel (2x8 mOhm integrated) |
| Number of Channels | 2 | 1 |
| On-Resistance (RDS(on)) per channel | 16 mΩ typical (8 mΩ channel-on resistance per channel pair) | — |
| Continuous Load Current per channel | 7.5 A | — |
| Nominal Supply Voltage | 12 V | — |
| Operating Supply Voltage Range | 3.1 V to 28 V | — |
| Load Dump / Transient Tolerance | 42 V per ISO 7637-2 | — |
| Reverse Battery Protection | -16 V | Yes (compatible with harshest requirements per family datasheet) |
| Standby Current | [DATA_NEEDED: standby current uA] | — |
| Current Sense (IS) Ratio kILIS | 5000 (typical) | — |
| Protection Features | Overtemperature shutdown, overcurrent, short to ground, short to VS, open load, ground loss | — |
| Diagnostic Output | Current-sense (IS) pin, analog/digital | — |
| Température de jonction en fonctionnement | -40 °C to +150 °C | — |
| Boîtier | PG-TSDSO-14-22 (TSSOP-14 EP, 14-pin thermal-pad SMD) | PG-TSDSO-14-22 (14-pin, exposed pad) |
| AEC-Q100 Qualification | Yes (Automotive Grade) | — |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | MSL3 (per JEDEC J-STD-020) | MSL2 or MSL3 (per JEDEC J-STD-020) |
| Statut RoHS | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Product Type | — | Smart High-Side Power Switch |
| Configuration de sortie | — | High-Side |
| Courant de sortie maximal | — | 8.5 A |
| On-State Resistance (RDS(on)) | — | 2 x 8 mOhm (typical) |
| Pin Pitch | — | 0.65 mm |
| Automotive Qualification | — | AEC-Q100 |
| Plage de température de fonctionnement | — | -40C to +150C (junction, AEC-Q100) |
| Supply Voltage (Vbb) | — | [DATA_NEEDED: Vbb operating range] |
| Load Dump Protection | — | Yes (integrated) |
| Diagnostics | — | Current sense / status output |
| Protections | — | Overload, short-circuit, over-temperature, over-voltage |
| Packaging | — | Tape & Reel |
| RoHS Compliance | — | Compliant |