BTS70082EPZXUMA1 vs BTS70402EPGXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS70082EPZXUMA1 par Infineon et BTS70402EPGXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS70082EPZXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,95 | $3,18 |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Product Family | PROFET+2 (Smart High-Side Switch) | — |
| Number of Channels | 2 | 4 |
| Topologie | High-Side N-Channel MOSFET Switch | — |
| Continuous Load Current per Channel | 7.5 A | 3.5 A (typical) |
| On-Resistance (typ) | 9 mOhm | — |
| On-Resistance (max) | 18 mOhm | — |
| Operating Supply Voltage (Vbb) | 4.1 V to 28 V | — |
| Logic Input Voltage | 3.3 V / 5 V compatible | — |
| Turn-On Time (max) | 110 us | — |
| Turn-Off Time (max) | 100 us | — |
| Plage de température de fonctionnement | -40 C to +175 C | -40 °C to +150 °C junction |
| Boîtier | PG-TDSO-14-11 (SOIC-14 with exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Type de montage | Surface Mount | Surface Mount |
| Protection Features | Overcurrent, Overtemperature, Overvoltage, Undervoltage, Reverse Battery (with ext. component) | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Output | Current Sense (IS pin) - analog proportional to load current | — |
| AEC-Q100 Qualified | Yes | — |
| Statut RoHS | Compliant | — |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Fonction | — | Smart High-Side Power Switch |
| Configuration de sortie | — | High-side, N-channel MOSFET |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |