BTS70202EPAXUMA1 vs BTT60302ERBXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS70202EPAXUMA1 par Infineon et BTT60302ERBXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTT60302ERBXUMA1 - 4A Dual-Channel High-Side PROFET Switch | Infineon
BTT60302ERBXUMA1 ✓ ActifComparaison des spécifications
| Paramètre | BTS70202EPAXUMA1 | BTT60302ERBXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,62 | $1,21 |
| Product Type | Smart High-Side Power Switch (dual channel) | — |
| Technology | SMART7 (PROFET family) | — |
| Number of Channels | 2 | — |
| Configuration de sortie | High-side, 1:1 N-Channel MOSFET per channel | — |
| Continuous Load Current (per channel) | 2.5 A | — |
| Total Device Load Current | 5 A | — |
| On-State Resistance (typ, per channel) | 30 mΩ | — |
| Operating Voltage Range (Vbb) | 6 V to 18 V (load dump tolerant) | — |
| Current Limit (typ) | 12 A (selectable) | — |
| Diagnostic Output | Analog current sense (IS pin) per channel | Yes (status feedback pin) |
| Protection Features | Over-current, short-circuit, over-temperature, over-voltage, reverse battery, loss of ground | — |
| Input Logic Compatibility | 3.3 V and 5 V CMOS | — |
| Boîtier | PG-TSDSO-14-22 (exposed pad) | PG-TDSO-14-31 (14-pin SOIC with Exposed Pad) |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | -40 C to +150 C (junction) | -40 C to +150 C |
| Packing | Tape & Reel (XUMA1 suffix) | Tape & Reel (Rexx suffix per Infineon naming) |
| Statut RoHS | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Product Family | — | PROFET (Protected MOSFET) |
| Switch Type | — | High-Side N-Channel Power Switch |
| Nombre de sorties | — | 2 |
| Input-Output Ratio | — | 1:1 |
| Maximum Output Current (per channel) | — | 4 A |
| Typical Rds(on) | — | 32 mOhm |
| Plage de tension d'entrée | — | -0.3 V to 6 V (logic) |
| Load Voltage Range | — | 24 V / 48 V nominal (PROFET 24V/48V family) |
| Automotive Qualification | — | AEC-Q100 |
| Integrated Protection | — | Over-current, over-voltage, over-temperature, short-circuit, reverse battery |
| Lead-Free / RoHS | — | Yes / Compliant |
| Niveau MSL | — | [DATA_NEEDED: MSL level] |