BTS70401EPAXUMA1 vs BTS70081EPAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS70401EPAXUMA1 par Infineon et BTS70081EPAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS70401EPAXUMA1 | BTS70081EPAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,05 | $0,96 |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch (PROFET) |
| Technology Family | PROFET+2 (SMART7) | — |
| Number of Channels | 1 | — |
| Typical On-Resistance (RDSon) | 0.019 Ohm | — |
| Nominal Load Current | 4.5 A | — |
| Load Voltage Range | 3.5 V to 28 V (12 V nominal) | — |
| Operating Supply Voltage (VS) | 3.5 V to 28 V | — |
| Input Logic Level | CMOS 3.3 V / 5 V compatible | — |
| Reverse Battery Protection | ReverSave (integrated) | — |
| Current Sense Output (IS) | Yes (analog) | — |
| Diagnostic Feedback | Fault flag + analog IS pin | — |
| AEC-Q100 Qualification | Grade 1 (-40 C to +125 C) | Qualified (automotive grade) |
| Functional Safety | ISO 26262-ready | — |
| Boîtier | PG-TSDSO-14-22 (14-pin, exposed pad) | PG-TSDSO-14-22 (14-pin, exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Statut RoHS | Compliant | Compliant |
| Topologie | — | 1:1 N-Channel High-Side Switch |
| Continuous Load Current | — | 10 A |
| On-State Resistance (RDS(on) typ.) | — | 9 mOhm |
| Tension d'alimentation de fonctionnement | — | 6 V to 18 V |
| Load-Dump Survival Voltage | — | 28 V (per AEC-Q100) |
| Standby Current | — | [DATA_NEEDED: standby current in uA] |
| Current Limitation (typ.) | — | [DATA_NEEDED: IL(LIM) value] |
| Diagnostic Output | — | Open-drain status / current sense |
| Protection Features | — | Reverse battery, over-load, short-circuit, over-temperature, over-voltage clamp, ground loss |
| Plage de température de fonctionnement | — | -40 C to +150 C (Tj) |
| Package Width | — | 3.90 mm (TSSOP-14 EP equivalent) |
| Niveau MSL | — | [DATA_NEEDED: MSL rating] |
| Lead-Free | — | Yes |