BTS70402EPGXUMA1 vs BTH61002EPAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS70402EPGXUMA1 par Infineon et BTH61002EPAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTH61002EPAXUMA1 - 2x 200mOhm 60V 48V Auto High-Side Switch | Infineon
BTH61002EPAXUMA1 ✓ ActifComparaison des spécifications
| Paramètre | BTS70402EPGXUMA1 | BTH61002EPAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,18 | $1,82 |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Part Family | PROFET+2 (BTS70xxx series) | — |
| Fonction | Smart High-Side Power Switch | — |
| Number of Channels | 4 | 2 |
| Configuration de sortie | High-side, N-channel MOSFET | — |
| Continuous Load Current per Channel | 3.5 A (typical) | 2.0 A |
| On-State Resistance (Ron) per Channel | 65 mOhm typical | — |
| Operating Voltage Range | 6 V to 18 V nominal (load-dump tolerant to 40 V) | — |
| Logic Supply Voltage | 3.3 V / 5 V compatible MCU I/O | — |
| Protection Features | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection | — |
| Diagnostic Interface | SPI status register, current-sense feedback | — |
| Plage de température de fonctionnement | -40 °C to +150 °C junction | -40 C to +150 C [DATA_NEEDED: junction T_max] |
| Boîtier | PG-TSDSO-14 (exposed thermal pad) | PG-TSDSO-14 (exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| RoHS Compliance | Compliant | — |
| Product Family | — | PROFET + 48V |
| Topologie | — | Dual high-side switch (2 x 1:1) |
| Switch Type | — | N-channel vertical power MOSFET with charge pump |
| Typical On-State Resistance (Ron) | — | 200 mOhm |
| Nominal Supply Voltage | — | 54 V |
| Maximum Operating Voltage | — | 60 V |
| Load Dump Capability | — | 60 V |
| Input Control Logic | — | Active-High / Active-Low |
| Diagnostic Function | — | Current sense output, open-load detection, short-to-ground/short-to-battery, overtemperature |
| Current Limitation | — | Adjustable |
| Automotive Qualification | — | AEC-Q100 |
| Statut RoHS | — | Compliant |