BTS710336ESAXUMA1 vs BTS3060TFATMA1 Comparaison
Comparaison détaillée côte à côte de BTS710336ESAXUMA1 par Infineon et BTS3060TFATMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS710336ESAXUMA1 | BTS3060TFATMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,45 | $0,65 |
| Product Type | SPI high-side power switch (SPOC+2 family) | Smart Low-Side Power Switch |
| Number of Channels | 6 (4 x 1.5 A + 2 x 3 A) | 1 |
| On-State Resistance (1.5 A channels) | 70 mOhm (typical) | — |
| On-State Resistance (3 A channels) | 22.5 mOhm (typical) | — |
| Maximum Channel Current (1.5 A channels) | 1.5 A | — |
| Maximum Channel Current (3 A channels) | 3 A | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range] | — |
| Logic Interface | SPI (daisy-chain capable, 3.3 V and 5 V compatible) | — |
| Diagnosis | Open-load, short-to-battery, short-to-ground, overtemperature, overload | — |
| Protection Functions | Overload, short-circuit, overtemperature, overvoltage | — |
| Boîtier | PG-TSDSO-24-42 (24-pin TSSOP with exposed pad) | PG-TO252-3 (DPAK), 3 pins (2+Tab) |
| Technology | SMART7 (SMART power) | — |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | -40C to +150C (Tj) | -40°C to +150°C (junction) |
| Statut RoHS | Compliant | Compliant |
| Family | SPOC+2 | — |
| Manufacturer Family | — | HITFET |
| On-Resistance (RDS(on) typ) | — | 50 mΩ at 25°C |
| Maximum Continuous Load Current | — | 3 A |
| Maximum Load Supply Voltage | — | 42 V |
| Type de transistor | — | N-Channel Vertical Power MOSFET (monolithically integrated) |
| Switch Configuration | — | Low-Side, 1:1 |
| Input Type | — | Logic-level gate input (3.3V / 5V compatible) |
| Diagnostic Output | — | Status pin (open-drain, requires pull-up) |
| Embedded Protection | — | Overcurrent, Overtemperature, Overvoltage, Open-load detection |
| Automotive Qualification | — | AEC-Q100 qualified |
| Packaging | — | Tape & Reel (TF suffix) |