BTS72004EPAXUMA1 vs BTS70402EPGXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS72004EPAXUMA1 par Infineon et BTS70402EPGXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS72004EPAXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,65 | $3,18 |
| Product Family | PROFET+ 12V | — |
| Switch Type | Smart High-Side Switch | — |
| Number of Channels | 4 | 4 |
| Topologie | 1:1 N-Channel High-Side | — |
| Per-Channel Output Current (nominal) | 1 A | — |
| On-State Resistance (Rdson) per channel | 66.5 mOhm | — |
| Operating Supply Voltage (Vbb) | 6 V to 18 V | — |
| Input Logic Level | Active High | — |
| Plage de température de fonctionnement | -40C to +150C | -40 °C to +150 °C junction |
| Protection Features | Overcurrent (OCP), Overvoltage, Undervoltage (UVP), Thermal Shutdown | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Output | Current Sense (IS pin) | — |
| Boîtier | PG-TSDSO-14 (TSSOP-14-EP, 150 mil) | PG-TSDSO-14 (exposed thermal pad) |
| Type de montage | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 | — |
| Statut RoHS | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Fonction | — | Smart High-Side Power Switch |
| Configuration de sortie | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |