BTS722204ESPXUMA1 vs BTS70402EPGXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS722204ESPXUMA1 par Infineon et BTS70402EPGXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS722204ESPXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,78 | $3,18 |
| Product Type | Multichannel high-side power switch with SPI | — |
| Family | SPOC +2 (SMART7) | — |
| Number of Channels | 4 | 4 |
| Channel 0 Rated Current | 4 A | — |
| Channel 1 Rated Current | 4 A | — |
| Channel 2 Rated Current | 7 A | — |
| Channel 3 Rated Current | 7 A | — |
| On-Resistance (low-RDS(on) channels) | 5.5 mOhm typical | — |
| On-Resistance (high-RDS(on) channels) | 13.5 mOhm typical | — |
| Load Voltage Range | [DATA_NEEDED: operating Vbat range] | — |
| Interface | SPI, daisy-chain capable | — |
| Logic Input Compatibility | 3.3 V and 5 V microcontrollers | — |
| Protection Features | Overcurrent, overtemperature, short-circuit, reverse polarity, ReverseON, programmable restart | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Outputs | Open-load, short-to-GND, short-to-Vbat, overtemperature flags via SPI | — |
| Boîtier | PG-TSDSO-24-32 (exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Type de montage | Surface Mount | Surface Mount |
| Température de fonctionnement | -40C to +150C (automotive AEC-Q100 grade expected) | — |
| AEC-Q100 | Qualified (automotive grade, per family) | — |
| Statut RoHS | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Fonction | — | Smart High-Side Power Switch |
| Configuration de sortie | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| Plage de température de fonctionnement | — | -40 °C to +150 °C junction |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |