BTS740S2XUMA1 vs BTS51202EKAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS740S2XUMA1 par Infineon et BTS51202EKAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS740S2XUMA1 | BTS51202EKAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,92 | $1,68 |
| Part Number | BTS740S2XUMA1 | — |
| Manufacturer | Infineon Technologies | — |
| Fonction | Dual-channel Smart High-Side Power Switch | — |
| Topologie | High-Side Switch, 1:1 N-Channel | Dual High-Side Switch (2 channels) |
| Number of Channels | 2 | 2 |
| Output Current per Channel | 4.9 A | — |
| Operating Voltage (Load) | 5 V to 28 V | — |
| Logic Supply Voltage | 3.0 V to 5.5 V | — |
| Input Type | CMOS-compatible, logic ground isolated | — |
| R_DS(on) per Channel | [DATA_NEEDED: R_DS(on) typical value] | — |
| On-State Resistance (typ, per channel) | [DATA_NEEDED: R_DS(on) typical value] | — |
| Protection Features | Overvoltage, Undervoltage, Overtemperature, Short-circuit, Open-load detection | — |
| Demagnetization | Fast active demagnetization for inductive loads | — |
| Diagnostic Output | Yes (open-load, short detection) | Yes (status feedback pin) |
| Standby Current | [DATA_NEEDED: I_stby typical] | — |
| Plage de température de fonctionnement | -40 °C to +150 °C (junction) | — |
| Boîtier | PG-DSO-20 (Power Small Outline, 20-pin) | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Automotive Qualified | AEC-Q100 (PROFET family) | Yes |
| Statut RoHS | Compliant | Compliant |
| Technology | — | Smart6 (N-channel vertical MOSFET with charge pump) |
| On-State Resistance (RDS(on)) | — | 120 mΩ (typical per channel) |
| Continuous Output Current | — | 2 A per channel (typical 2.5 A) |
| Operating Voltage (Vbb) | — | 8 V to 18 V |
| Load Type | — | Lamps up to 1×10 W, LEDs, resistive/inductive loads |
| Température de fonctionnement | — | -40 °C to +150 °C |
| Maximum Power Dissipation | — | 1800 mW |
| Integrated Protection | — | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery |
| Charge Pump | — | Integrated |