BTT60101ERBXUMA1 vs BTS70082EPAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTT60101ERBXUMA1 par Infineon et BTS70082EPAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTT60101ERBXUMA1 - 10mΩ Smart High-Side Switch 9A 24V/48V | Infineon
BTT60101ERBXUMA1 ✓ ActifInfineon
BTS70082EPAXUMA1 - 2x 8mΩ 7.5A Smart High-Side Switch | Infineon PROFET
BTS70082EPAXUMA1 ✓ ActifComparaison des spécifications
| Paramètre | BTT60101ERBXUMA1 | BTS70082EPAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,24 | $2,05 |
| Product Type | Smart High-Side Power Switch | — |
| Number of Channels | 1 | 2 |
| On-State Resistance (Typ) | 10 mΩ | — |
| Continuous Load Current | 9 A | — |
| Supply Voltage Range | 5 V to 36 V | — |
| Reverse Battery Protection | up to -36 V | -16 V |
| Plage de température de fonctionnement | -40 °C to +150 °C | — |
| Input Control Logic | Active High | — |
| Diagnostic Output | Status pin (ST) and current sense (IS) | Current-sense (IS) pin, analog/digital |
| Topologie | N-Channel vertical MOSFET with charge pump | — |
| Process Technology | Infineon Smart6 | — |
| Boîtier | PG-TDSO-14-11 (SOIC-14-EP, Exposed Pad) | PG-TSDSO-14-22 (TSSOP-14 EP, 14-pin thermal-pad SMD) |
| Type de montage | Surface Mount | Surface Mount |
| Targeted Lamp Load | 5 × P21W 24 V or 1 × H55W 12 V | — |
| Compliance | RoHS | — |
| Product Family | — | PROFET+2 (12 V, dual channel) |
| Switch Type | — | High-side N-channel MOSFET switch |
| On-Resistance (RDS(on)) per channel | — | 16 mΩ typical (8 mΩ channel-on resistance per channel pair) |
| Continuous Load Current per channel | — | 7.5 A |
| Nominal Supply Voltage | — | 12 V |
| Operating Supply Voltage Range | — | 3.1 V to 28 V |
| Load Dump / Transient Tolerance | — | 42 V per ISO 7637-2 |
| Standby Current | — | [DATA_NEEDED: standby current uA] |
| Current Sense (IS) Ratio kILIS | — | 5000 (typical) |
| Protection Features | — | Overtemperature shutdown, overcurrent, short to ground, short to VS, open load, ground loss |
| Température de jonction en fonctionnement | — | -40 °C to +150 °C |
| AEC-Q100 Qualification | — | Yes (Automotive Grade) |
| Niveau MSL | — | MSL3 (per JEDEC J-STD-020) |
| Statut RoHS | — | Compliant |