BTT60302ERAXUMA1 vs TLE9104SHXUMA1 Comparaison
Comparaison détaillée côte à côte de BTT60302ERAXUMA1 par Infineon et TLE9104SHXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTT60302ERAXUMA1 | TLE9104SHXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,18 | $3,72 |
| Product Type | Dual-channel Smart High-Side Power Switch | Multi-Channel Low-Side Power Switch |
| Family | PROFET+ 24V | — |
| Number of Channels | 2 | 4 |
| On-State Resistance (typ, per channel, 25°C) | 32 mΩ | — |
| Continuous Load Current (per channel) | 4 A | — |
| Operating Supply Voltage (Vbb) | 8 V to 36 V | — |
| Load-Dump Tolerance | 42 V | — |
| Switch Type | 1:1 N-Channel high-side | — |
| Process Technology | Smart6 (vertical N-MOSFET + charge pump) | — |
| Diagnostic Output | Current sense (IS pin) | SPI status registers (per-channel fault flags) |
| Protection Features | Overcurrent, overtemperature, short-to-ground/battery, ESD, open-load detection | Over-current, Over-temperature, Over-load, short-to-ground, open-load detection |
| Automotive Qualification | AEC-Q100 | AEC-Q100 qualified (automotive grade) |
| Boîtier | PG-TDSO-14-31 (14-pin, exposed pad) | PG-DSO-20-88 (20-pin BFSOP with exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Température de fonctionnement | -40 °C to +150 °C junction | -40 °C to +150 °C (junction) |
| Standby Current | [DATA_NEEDED: standby current] | — |
| Statut RoHS | Compliant | — |
| Load Current per Channel | — | 3 A (continuous) |
| Topologie | — | 1:1 N-Channel Low-Side Switch |
| Supply Voltage Range (VDD) | — | 4.5 V to 28 V |
| Logic Reference (VIO) | — | 3.3 V / 5 V compatible |
| Communication Interface | — | 16-bit SPI |
| R_DS(on) per Channel | — | [DATA_NEEDED: typical R_DS(on) in mohm] |
| Niveau MSL | — | MSL3 (per JEDEC J-STD-020) |
| RoHS / Lead-Free | — | RoHS compliant, lead-free |
| Reset Pin (RESN) | — | Active-low with configurable reset duration |