BTT60302ERBXUMA1 vs ITS716GFUMA1 Comparaison
Comparaison détaillée côte à côte de BTT60302ERBXUMA1 par Infineon et ITS716GFUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTT60302ERBXUMA1 - 4A Dual-Channel High-Side PROFET Switch | Infineon
BTT60302ERBXUMA1 ✓ ActifComparaison des spécifications
| Paramètre | BTT60302ERBXUMA1 | ITS716GFUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,21 | $3,22 |
| Manufacturer | Infineon Technologies | — |
| Product Family | PROFET (Protected MOSFET) | — |
| Switch Type | High-Side N-Channel Power Switch | — |
| Nombre de sorties | 2 | — |
| Input-Output Ratio | 1:1 | — |
| Maximum Output Current (per channel) | 4 A | — |
| Typical Rds(on) | 32 mOhm | — |
| Plage de tension d'entrée | -0.3 V to 6 V (logic) | — |
| Load Voltage Range | 24 V / 48 V nominal (PROFET 24V/48V family) | — |
| Boîtier | PG-TDSO-14-31 (14-pin SOIC with Exposed Pad) | PG-DSO-20-32 (20-pin SOIC, exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | -40 C to +150 C | -40 C to +85 C (industrial grade) |
| Automotive Qualification | AEC-Q100 | — |
| Integrated Protection | Over-current, over-voltage, over-temperature, short-circuit, reverse battery | — |
| Diagnostic Output | Yes (status feedback pin) | Open-drain fault flag, one per channel |
| Lead-Free / RoHS | Yes / Compliant | — |
| Niveau MSL | [DATA_NEEDED: MSL level] | [DATA_NEEDED: MSL rating] |
| Packing | Tape & Reel (Rexx suffix per Infineon naming) | — |
| Product Type | — | Smart High-Side Power Switch |
| Number of Channels | — | 4 |
| Configuration de sortie | — | High-side (N-Channel MOSFET) |
| Continuous Current per Channel | — | 2.3 A |
| On-State Resistance (RON) per Channel | — | [DATA_NEEDED: Ron typical value] |
| Operating Voltage Range (Vbb) | — | 5 V to 36 V |
| Load Dump Tolerance | — | Up to 45 V |
| Standby Current | — | [DATA_NEEDED: Iq standby typical] |
| Input Logic Levels | — | CMOS/TTL compatible, parallel interface |
| Protection Features | — | Overload, short-circuit, over-temperature, over-voltage, ESD |
| PWM Capability | — | Up to 1 kHz |
| Résistance thermique, jonction-ambiance | — | [DATA_NEEDED: theta_JA value] |
| Statut RoHS | — | Compliant |