BTT62001ENAXUMA1 vs BTS52001ENAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTT62001ENAXUMA1 par Infineon et BTS52001ENAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTT62001ENAXUMA1 - 200mΩ 1.5A Smart High-Side Power Switch | Infineon
BTT62001ENAXUMA1 ✓ Actif
Comparaison des spécifications
| Paramètre | BTT62001ENAXUMA1 | BTS52001ENAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,72 | $0,82 |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Topologie | 1:1 N-Channel High-Side | — |
| On-State Resistance (Ron) | 200 mΩ (typical) | — |
| Continuous Load Current | 1.5 A | 1.5 A |
| Operating Voltage Range | 5 V to 48 V | 4.5 V to 28 V (load-dump tolerant) |
| Technology | Smart6 HV (N-channel vertical MOSFET with charge pump) | Smart6 (N-channel vertical MOSFET with charge pump) |
| Boîtier | PG-TDSO-8-31 (DSO-8 with exposed pad) | PG-TDSO-8-31 (Exposed Pad) |
| Type de montage | Surface Mount | Surface Mount |
| Protection Features | Overload, Short-Circuit, Over-Temperature, Over-Voltage, Reverse Battery | — |
| Diagnostic Output | Current Sense (IS) pin | Yes (status feedback) |
| Lamp Drive Capability | 1 × R10W at 24 V or 1 × R5W at 12 V | — |
| Température de fonctionnement | -40 °C to +150 °C junction | — |
| Niveau MSL | 2A (4 weeks) | — |
| ECCN | EAR99 | — |
| REACH Status | REACH Unaffected | — |
| Family | — | Classic PROFET 12V |
| Number of Channels | — | 1 |
| On-State Resistance (RDS(on)) | — | 200 mΩ (typical) |
| Nominal Operating Voltage | — | 12 V |
| Input Control | — | Logic-level, active-high |
| Open-Load Detection | — | Yes (in OFF state) |
| Current Limitation | — | Yes (integrated) |
| Over-Temperature Protection | — | Yes (with auto-restart) |
| Over-Voltage Protection | — | Yes (load-dump robust) |
| Plage de température de fonctionnement | — | -40 °C to +150 °C |
| Automotive Qualification | — | AEC-Q100 qualified |
| Target Load | — | 1× R10W 12V lamp, LEDs |