CI522 vs MFRC52201HN1,115 Comparaison
Comparaison détaillée côte à côte de CI522 par NI et MFRC52201HN1,115 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MFRC52201HN1,115 - 13.56MHz RFID Reader IC | NXP | MIFARE
MFRC52201HN1,115 ✓ ActifComparaison des spécifications
| Paramètre | CI522 | MFRC52201HN1,115 |
|---|---|---|
| Marque | NI | NXP Semiconductors |
| Catégorie | RF Transceivers | RF Transceivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,18 | $4,10 |
| Manufacturer | Nanjing Zhongke Microelectronics | — |
| Fonction | 13.56 MHz contactless reader/writer IC | RFID Reader IC (contactless reader front-end) |
| Supported Protocol | ISO/IEC 14443 Type A | ISO/IEC 14443 A, MIFARE |
| Operating Frequency | 13.56 MHz | — |
| Maximum Data Rate | 848 Kbit/s | — |
| Tension d'alimentation | 2.3 V to 4 V | 2.5 V to 3.6 V |
| Host Interface | SPI | — |
| Built-in Antenna Driver | Yes | — |
| Hardware Data Verification | CRC and parity, on-chip | — |
| Low-Power Wake-up | Yes (configurable polling) | — |
| Boîtier | QFN-16-EP (3x3 mm) | 32-pin HVQFN with exposed pad |
| Type de montage | Surface Mount | Surface Mount |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Niveau MSL | [DATA_NEEDED: MSL rating] | — |
| Statut RoHS | Compliant (per JLCPCB listing) | EU RoHS Compliant |
| Frequency | — | 13.56 MHz |
| Host Interfaces | — | SPI, I2C, UART |
| Operating Supply (typical range) | — | 2.5 V to 3.3 V |
| Packaging | — | Tape & Reel (T/R) |
| Crypto Engine | — | Crypto-1 for MIFARE authentication |
| Version | — | MFRC522 version 1.0 |
| Transmitter Output Power | — | [DATA_NEEDED: transmitter output power] |
| Supply Current (idle/tx) | — | [DATA_NEEDED: supply current] |
| FIFO Buffer Size | — | [DATA_NEEDED: FIFO buffer size] |
| SPI Max Data Rate | — | [DATA_NEEDED: SPI max data rate] |