CP2101 vs CP2104-F03-GMR Comparaison
Comparaison détaillée côte à côte de CP2101 par Silicon Labs et CP2104-F03-GMR par Silicon Labs. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | CP2101 | CP2104-F03-GMR |
|---|---|---|
| Marque | Silicon Labs | Silicon Labs |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Dernier achat | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,55 | $1,06 |
| Fonction | USB to UART Bridge Controller | USB 2.0 to UART bridge controller |
| USB Standard | USB 2.0 Full-Speed (12 Mbps) | USB 2.0 full speed, 12 Mbps |
| Integrated Transceiver | Yes | — |
| Integrated Oscillator | Yes (internal) | — |
| Integrated EEPROM | Yes (programmable) | — |
| Integrated Voltage Regulator | 5 V to 3 V, up to 100 mA | — |
| UART Data Rate | 300 bps to 921.6 kbps | — |
| Modem Control Signals | RTS, CTS, DTR, DSR, DCD, RI (full) | — |
| Operating Voltage (VBUS) | 4.0 V to 5.25 V | — |
| Regulated Output | 3.0 V to 3.6 V (3.3 V typical) | — |
| Boîtier | MLP/QFN-28 (5 x 5 mm) | 24-QFN (4x4 mm) with exposed pad |
| Driver Support | Windows, macOS, Linux (virtual COM port) | — |
| Configuration | USB bus-powered or self-powered | — |
| Température de fonctionnement | [DATA_NEEDED: operating temperature] | -40C to +85C |
| Statut RoHS | Compliant | Compliant |
| Bus-Powered Capable | Yes | — |
| UART Channels | — | 1 |
| Baud Rate Range | — | 300 bps to 2 Mbps (programmable) |
| FIFO Buffer | — | 576 byte |
| Tension d'alimentation | — | 3 V to 3.6 V (VDD) |
| I/O Supply (VIO) | — | 1.8 V, 3 V to 3.6 V |
| On-Chip Regulator Output | — | 3.45 V |
| Non-Volatile Memory | — | 1024 byte one-time-programmable ROM |
| GPIO | — | 4 digital I/O pins |
| Flow Control | — | ~RTS, ~CTS, ~DTR, ~DSR, ~DCD, ~RI |
| Type de montage | — | Surface Mount |
| Integrated Clock | — | Yes (no external crystal required) |
| Integrated USB Transceiver | — | Yes (no external resistors required) |
| Power-On Reset | — | On-chip |