CP2102N-A02-GQFN20R vs CP2102N-A01-GQFN20R Comparaison
Comparaison détaillée côte à côte de CP2102N-A02-GQFN20R par Silicon Labs et CP2102N-A01-GQFN20R par Silicon Labs. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Silicon Labs
CP2102N-A02-GQFN20R - USB to UART Bridge, QFN-20 | Silicon Labs (Tape & Reel)
CP2102N-A02-GQFN20R ✓ ActifSilicon Labs
CP2102N-A01-GQFN20R USB 2.0 UART Bridge | Silicon Labs (Tape & Reel)
CP2102N-A01-GQFN20R ✓ ActifComparaison des spécifications
| Paramètre | CP2102N-A02-GQFN20R | CP2102N-A01-GQFN20R |
|---|---|---|
| Marque | Silicon Labs | Silicon Labs |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Fonction | USB to UART Bridge Controller | — |
| Family | USBXpress | — |
| USB Specification | USB 2.0 Full-Speed (12 Mbps) | — |
| Supply Voltage (VDD) | 3.0 V to 3.6 V | — |
| UART Data Bits | 5, 6, 7, or 8 | — |
| GPIO Pins | 4 | — |
| Baud Rate | Up to 1 Mbaud (typical application) | — |
| Parity | None, Even, Odd, Mark, Space | — |
| Flow Control | RTS/CTS, XON/XOFF (hardware and software) | — |
| On-Chip Regulator | 3.3 V LDO output | — |
| Internal Oscillator | Yes (48 MHz, no external crystal required) | — |
| Battery Charger Detect | Yes | — |
| Température de fonctionnement | -40C to +85C | — |
| Boîtier | QFN-20 (3x3 mm) | 20-QFN, 3 mm x 3 mm |
| Type de montage | Surface Mount | Surface mount |
| Nombre de broches | 20 | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Lead Free | Yes | — |
| Product Type | — | USB 2.0 full-speed USB-to-UART bridge controller |
| USB Interface | — | USB 2.0 full-speed |
| UART Interface | — | Universal Asynchronous Receiver/Transmitter |
| Supply Voltage Range | — | 3 V to 3.6 V |
| Integrated Regulator Output | — | 3.3 V |
| Digital I/O Pins | — | 4 |
| Programmable ROM | — | 960 bytes |
| Internal Functions | — | USB function controller, USB transceiver, oscillator, and UART |
| External USB Components | — | None required for development |
| External Crystal | — | No external crystal required |
| Power-on Reset | — | On-chip power-on reset circuit |
| Programmable Identification | — | Vendor ID, product ID, serial number, power descriptor, release number, and product description strings |
| Datasheet Document Number | — | [DATA_NEEDED: datasheet document number] |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| UART Data Rate | — | [DATA_NEEDED: UART data rate] |
| REACH Status | — | [DATA_NEEDED: REACH status] |