CP2105-F01-GMR vs CP2105-F01-GM Comparaison

Comparaison détaillée côte à côte de CP2105-F01-GMR par Silicon Labs et CP2105-F01-GM par Silicon Labs. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Silicon Labs
CP2105-F01-GMR CP2105-F01-GMR USB 2.0 Dual UART Bridge | Silicon Labs

CP2105-F01-GMR USB 2.0 Dual UART Bridge | Silicon Labs

CP2105-F01-GMR ✓ Actif
Silicon Labs
CP2105-F01-GM CP2105-F01-GM - USB 2.0 Dual-UART Bridge | Silicon Labs

CP2105-F01-GM - USB 2.0 Dual-UART Bridge | Silicon Labs

CP2105-F01-GM ✓ Actif

Comparaison des spécifications

Paramètre CP2105-F01-GMR CP2105-F01-GM
Marque Silicon Labs Silicon Labs
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $2,11 $2,48
Device Type USB 2.0 full-speed to dual UART interface bridge —
USB Speed USB 2.0 full speed —
UART Channels 2 asynchronous serial data buses 2 asynchronous serial data buses
Tension d'alimentation 1.8 V or 3.3 V —
Boîtier QFN-24, 4 x 4 mm 24-QFN, 4 x 4 mm
Integrated USB Transceiver Yes Yes
Integrated Clock Generator Yes —
External Crystal Required No —
One-Time Programmable ROM 296 bytes —
Integrated Voltage Regulator 3.45 V output —
Power-On Reset On-chip —
Baud Rate Programmable —
Hardware Flow Control Supported —
Modem Control Signals Full modem control signals —
USB Termination Resistors Not required; integrated USB transceiver —
Température de fonctionnement [DATA_NEEDED: operating temperature range] —
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: automotive qualification status] —
Product Type — USB 2.0 full-speed to dual-UART bridge controller
USB Interface — USB 2.0 full-speed
Modem Control — Full modem-control signals
Integrated Oscillator — Yes
Programmable ROM — One-time programmable ROM
Digital I/O — 5 digital I/O pins
Package Terminology — QFN-24, also described as MLF or MLP in the verified datasheet snippet
Exposed Pad — Exposed pad package indicated by the verified datasheet/distributor descriptions
Interface Category — USB-to-UART interface IC
Host Connectivity — USB host connection
Legacy Serial Support — USB-to-serial bridge for legacy serial designs
Driver Support — Royalty-free drivers identified by Silicon Labs product-page result
Operating Supply — [DATA_NEEDED: operating supply voltage]
UART Baud Rate — [DATA_NEEDED: UART baud-rate range]
USB Operating Temperature — [DATA_NEEDED: operating temperature range]
Automotive Qualification — [DATA_NEEDED: automotive qualification status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis