CP2109-A01-GM vs CP2109-A01-GMR Comparaison

Comparaison détaillée côte à côte de CP2109-A01-GM par Silicon Labs et CP2109-A01-GMR par Silicon Labs. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Silicon Labs
CP2109-A01-GM CP2109-A01-GM - USB 2.0 to UART Bridge | Silicon Labs

CP2109-A01-GM - USB 2.0 to UART Bridge | Silicon Labs

CP2109-A01-GM Unknown
Silicon Labs
CP2109-A01-GMR CP2109-A01-GMR - USB to UART Bridge, 28-QFN | Silicon Labs

CP2109-A01-GMR - USB to UART Bridge, 28-QFN | Silicon Labs

CP2109-A01-GMR ✓ Actif

Comparaison des spécifications

Paramètre CP2109-A01-GM CP2109-A01-GMR
Marque Silicon Labs Silicon Labs
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Unknown Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $0,00 $2,42
Device Type Single-chip USB-to-UART bridge —
USB Standard USB 2.0 —
Supported USB Speed Low-speed and full-speed —
UART Interface 1 channel —
Supply Voltage Range 3.3 V to 3.6 V —
Integrated USB Transceiver Yes —
External USB-Termination Resistors Not required —
Integrated Clock Yes —
External Crystal Not required —
On-Chip Power-On Reset Yes —
Programmable Memory Internal 1024-byte programmable ROM —
Configurable Descriptor Data Vendor ID, product ID, serial number, power descriptor, release number, and product description strings —
CP2109 Memory Type One-time-programmable memory —
Boîtier 28-QFN, 5 mm by 5 mm 28-QFN (5x5 mm) with Exposed Pad
Type de montage Surface mount Surface Mount
Statut RoHS EU RoHS compliant Compliant
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] —
Maximum UART Baud Rate [DATA_NEEDED: maximum UART baud rate] —
Pin Configuration [DATA_NEEDED: complete manufacturer pin configuration] —
Manufacturer — Silicon Labs
Fonction — USB Bridge, USB to UART
Protocol — USB
Interface — UART
Standards — USB 2.0
Tension d'alimentation — 3.0 V to 3.6 V
Operating Supply Current — 17 mA (typical, per Cross-Reference data)
FIFO Buffer — 640 Byte
USB Speed — Full-Speed 12 Mbps
Number of UART Channels — 1
Data Bits — 5, 6, 7, 8
Baud Rate Range — 300 bps to 1 Mbaud
Température de fonctionnement — -40 C to +85 C

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis