CYW43455XKUBGT vs CYW43455LXKUBGT Comparaison
Comparaison détaillée côte à côte de CYW43455XKUBGT par Infineon et CYW43455LXKUBGT par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | CYW43455XKUBGT | CYW43455LXKUBGT |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | RF Transceivers | RF Transceivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,14 | $5,60 |
| Device Type | Wi-Fi + Bluetooth Combo SoC (RF TxRx + MCU) | — |
| Wi-Fi Standard | 802.11a/b/g/n/ac (Wi-Fi 5) | Wi-Fi 5 (802.11ac) |
| Bluetooth Version | Bluetooth 5.3 (DigiKey listing cites Bluetooth v4.1 base rating) | Bluetooth 5.3 (per Infineon product page); DigiKey category lists Bluetooth v4.1 |
| Frequency Bands | 2.4 GHz and 5 GHz | 2.4 GHz and 5 GHz |
| Maximum PHY Data Rate | 433.3 Mbps | — |
| Receiver Sensitivity | -95.5 dBm | — |
| MIMO Configuration | 1x1 SISO | — |
| Coexistence Interface | Integrated Wi-Fi and Bluetooth coexistence, 2-/3-wire GCI | — |
| Boîtier | 140-UFBGA, WLBGA (WLCSP), 4.47 x 5.27 mm | 140-UFBGA / WLBGA (WLCSP-140) |
| Automotive Grade | N (not automotive qualified) | — |
| Silicon | Device Type: Silicon | — |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Tension d'alimentation | [DATA_NEEDED: supply voltage range] | [DATA_NEEDED: supply voltage range] |
| Host Interface | [DATA_NEEDED: host interface (SDIO/PCIe/UART)] | [DATA_NEEDED: host interface (SDIO/PCIe/UART)] |
| Type de montage | Surface Mount | Surface Mount |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance statement] |
| Product Type | — | RF Transceiver + MCU, Wi-Fi and Bluetooth Combo |
| Package Dimensions | — | 4.47 x 5.27 mm |
| Integrated MCU | — | Yes (runs Wi-Fi/BT protocol stacks) |
| Wi-Fi Channels | — | [DATA_NEEDED: supported channel bandwidths (20/40/80 MHz)] |
| TX Output Power | — | [DATA_NEEDED: maximum transmit power] |
| RX Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| Antenna Ports | — | [DATA_NEEDED: number of antenna ports / MIMO configuration] |