DG212CJ+ vs DG212DJ+ Comparaison
Comparaison détaillée côte à côte de DG212CJ+ par Intersil et DG212DJ+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | DG212CJ+ | DG212DJ+ |
|---|---|---|
| Marque | Intersil | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Number of Channels | 4 channels | — |
| Switch Configuration | 4 x SPST | 1:1 SPST |
| Initial Switch State | Normally open | — |
| On Resistance | 175 ohm maximum | 175 ohm |
| Dual Supply Voltage Range | ±4.5 V to ±18 V | — |
| Turn-On Time | 1000 ns maximum | — |
| Turn-Off Time | 500 ns maximum | — |
| Control Input Type | Inverted digital control inputs | — |
| Signal-to-Noise Ratio | 120 dB typical | — |
| Off Isolation | -60 dB typical at 1 MHz | — |
| Channel-to-Channel Match | 5 ohm typical | — |
| Boîtier | 16-pin PDIP | 16-pin PDIP |
| Type de montage | Through-hole | Through-hole |
| Process Technology | CMOS monolithic | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Courant d'alimentation | [DATA_NEEDED: supply current] | — |
| Power Consumption | [DATA_NEEDED: power consumption] | [DATA_NEEDED: power consumption] |
| Statut RoHS | [DATA_NEEDED: RoHS status] | RoHS Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of Circuits | — | 4 circuits |
| Switch Type | — | Normally open SPST |
| Positive Supply Voltage Range | — | +4.5 V to +18 V |
| Negative Supply Voltage Range | — | -4.5 V to -18 V |
| Supply Voltage Range | — | ±4.5 V to ±18 V |
| Control Logic | — | CMOS-compatible |
| Control Polarity | — | Inverted relative to DG202 |
| Latch-Up Protection | — | Guaranteed with input signals connected during power-supply disconnection |
| Lead-Free Status | — | Lead Free |
| Production Status | — | PRODUCTION |
| Channel-On Resistance Matching | — | [DATA_NEEDED: channel-on resistance matching] |
| Off Leakage Current | — | [DATA_NEEDED: off leakage current] |
| Charge Injection | — | [DATA_NEEDED: charge injection] |
| Switching Time | — | [DATA_NEEDED: switching time] |