DG309CJ+ vs DG309CY+ Comparaison
Comparaison détaillée côte à côte de DG309CJ+ par Maxim Integrated et DG309CY+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Maxim Integrated
DG309CJ+ - Quad SPST Normally Closed Analog Switch, 60 Ohm | Maxim Integrated
DG309CJ+ ✓ ActifComparaison des spécifications
| Paramètre | DG309CJ+ | DG309CY+ |
|---|---|---|
| Marque | Maxim Integrated | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Switch Type | SPST, Normally Closed (SPST-NC), 4 circuits | Quad SPST |
| Number of Channels | 1 channel per switch, 4 switches per device | — |
| On-Resistance | 60 ohm typical (datasheet feature); 85 ohm listed by Harris/Vishay distributors, 100 ohm listed by Analog Devices distributors | 100 ohm |
| Analog Input Range | 15 V maximum | — |
| Turn-On Time | Less than 120 ns | — |
| Turn-Off Time | Less than 90 ns | — |
| Switching Speed | 130 ns | — |
| Power Dissipation | 30 nW | — |
| Logic Compatibility | CMOS logic compatible | — |
| Signal Range | Full rail-to-rail analog signal range | — |
| Dual Supply Voltage Range | +/-5 V to +/-20 V | — |
| Single Supply Voltage Range | +5 V to +30 V | — |
| Maximum Dual Supply Voltage | +/-20 V | — |
| Boîtier | PDIP-16 (0.300 inch / 7.62 mm pitch), plastic | 16-SOIC |
| Type de montage | Through-hole | Surface mount |
| Technology | Monolithic CMOS | CMOS analog switch |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Statut RoHS | unknown | unknown |
| Number of Switches | — | 4 circuits |
| Switch Configuration | — | 1:1 |
| Contact State | — | Normally closed |
| Nombre de broches | — | 16 pins |
| Signal Paths | — | 4 independent switch channels |
| Tension d'alimentation | — | [DATA_NEEDED: supply voltage range] |
| Control Input Logic | — | [DATA_NEEDED: control input logic levels] |
| On-Resistance Flatness | — | [DATA_NEEDED: on-resistance flatness] |
| Off Leakage Current | — | [DATA_NEEDED: off leakage current] |
| Charge Injection | — | [DATA_NEEDED: charge injection] |
| Switching Time | — | [DATA_NEEDED: switching time] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |