DG407DN+T vs DG407DN+ Comparaison

Comparaison détaillée côte à côte de DG407DN+T par Analog Devices et DG407DN+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Analog Devices
DG407DN+T DG407DN+T Dual 8:1 CMOS Analog Mux | Analog Devices

DG407DN+T Dual 8:1 CMOS Analog Mux | Analog Devices

DG407DN+T ✓ Actif

Comparaison des spécifications

Paramètre DG407DN+T DG407DN+
Marque Analog Devices Analog Devices
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Multiplexer Configuration Dual 8:1 multiplexer Dual 8:1
Single-Ended Channel Count 16 channels —
Differential Channel Count 8 channels —
Maximum On-State Resistance 100 ohms 100 ohm
Switch-On Time 200 ns —
Technology CMOS —
Logic Compatibility TTL- and CMOS-compatible —
Plage de température de fonctionnement -40 °C to +85 °C [DATA_NEEDED: operating temperature range]
Boîtier 28-pin PLCC, 11.51 mm × 11.51 mm 28-pin PLCC, 11.51 mm x 11.51 mm
Number of Circuits 2 circuits 2 circuits
Number of Terminals 28 terminals —
Type de montage Surface mount Surface mount
Enable Function Device-section enable control —
Digital Address Inputs 4-bit address control —
Supply Voltage Range [DATA_NEEDED: supply voltage range] [DATA_NEEDED: supply voltage range]
Analog Signal Voltage Range [DATA_NEEDED: analog signal voltage range] —
Off-State Leakage Current [DATA_NEEDED: off-state leakage current] [DATA_NEEDED: off-state leakage current]
Switch-Off Time [DATA_NEEDED: switch-off time] —
Channel-to-Channel Crosstalk [DATA_NEEDED: channel-to-channel crosstalk] —
Power Consumption [DATA_NEEDED: power consumption] —
Statut RoHS [DATA_NEEDED: RoHS status] unknown
REACH Status [DATA_NEEDED: REACH status] unknown
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] unknown
Internal Analog Switch Array — 16 switches
Channel-Selection Logic — TTL- and CMOS-compatible
Logic Threshold Reference — Internal voltage reference
Device Enable — Enable input for device selection
Digital Address Width — [DATA_NEEDED: address width]
Analog Signal Range — [DATA_NEEDED: analog signal voltage range]
On-State Resistance Matching — [DATA_NEEDED: maximum on-resistance matching]
On-State Resistance Flatness — [DATA_NEEDED: on-state resistance flatness]
Channel Crosstalk — [DATA_NEEDED: channel crosstalk]
Charge Injection — [DATA_NEEDED: charge injection]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis