DRV8806PWPR vs DRV8873HPWPRQ1 Comparaison
Comparaison détaillée côte à côte de DRV8806PWPR par Texas Instruments et DRV8873HPWPRQ1 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | DRV8806PWPR | DRV8873HPWPRQ1 |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Motor Drivers | Motor Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,20 | $2,42 |
| Number of Channels | 4 (quad low-side) | — |
| Configuration de sortie | Low-side DMOS, open drain | — |
| Supply Voltage (VM) | 8.2 V to 38 V | — |
| Continuous Output Current per Channel | 2 A | — |
| Peak Output Current per Channel | 3 A | — |
| RDS(on) per Channel | 200 mOhm (typical) | — |
| Interface | SPI (serial, 3.3 V logic) | — |
| Open-Load Detection | Yes, via SPI | — |
| Protection contre les surintensités | Yes, per channel | — |
| Arrêt thermique | Yes | — |
| Undervoltage Lockout | Yes | — |
| Built-in Clamp Diodes | Yes (freewheeling) | — |
| Température de fonctionnement | -40C to +85C | — |
| Boîtier | HTSSOP-16 (PWP) with PowerPAD | 24-pin HTSSOP (PWP) with PowerPAD |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 2 | 2 (1 year floor life at <=30 C / 60% RH) |
| Statut RoHS | Compliant | Compliant |
| Product Type | — | H-Bridge Motor Driver |
| Motor Type | — | Brushed DC |
| Number of H-Bridges | — | 1 |
| Supply Voltage Range | — | 4.5 V to 38 V |
| Peak Output Current | — | 10 A |
| Continuous Output Current | — | 3.5 A (estimated, derate with package temperature) |
| Rds(on) (HS + LS) | — | [DATA_NEEDED: Rds(on) per FET] |
| Control Interface | — | Hardwired (HW) / PH-EN / PWM |
| Current Sensing | — | Integrated (IPROPI proportional output) |
| Courant de repos | — | [DATA_NEEDED: Iq value] |
| Plage de température de fonctionnement | — | -40 C to +125 C |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| Lead-Free / REACH | — | Yes (compliant) |
| Protection Features | — | UVLO, OCP, TSD, automatic fault retry |