DRV8825PWPR vs DRV8818PWPR Comparaison

Comparaison détaillée côte à côte de DRV8825PWPR par Texas Instruments et DRV8818PWPR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
DRV8825PWPR DRV8825PWPR - 45V 2.5A Stepper Motor Driver | TI

DRV8825PWPR - 45V 2.5A Stepper Motor Driver | TI

DRV8825PWPR ✓ Actif
Texas Instruments
DRV8818PWPR DRV8818PWPR - 2.5A Bipolar Stepper Motor Driver | TI

DRV8818PWPR - 2.5A Bipolar Stepper Motor Driver | TI

DRV8818PWPR ✓ Actif

Comparaison des spécifications

Paramètre DRV8825PWPR DRV8818PWPR
Marque Texas Instruments Texas Instruments
Catégorie Motor Drivers Motor Drivers
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $2,19 $2,20
Motor Type Bipolar Stepper Bipolar Stepper
Output Current 2.5 A (peak) —
Supply Voltage (VM) 8.2 V to 45 V —
Logic Supply Voltage (VDD) 3.3 V to 5 V —
Microstepping 1/32 step —
Number of H-Bridges 2 —
RDS(on) (High-Side + Low-Side) 0.55 ohm (typical) —
Current Regulation Yes (PWM) —
Fault Protection Overcurrent, Overtemperature, Undervoltage Lockout —
Température de fonctionnement -40C to +85C —
Boîtier HTSSOP-28 (PWP) HTSSOP-28 (PWP)
Type de montage Surface Mount —
Niveau MSL 3 (168 hours) —
Statut RoHS Compliant Compliant
Interface Step/Direction, Phase/Enable —
Output Current per Winding — 2.5 A
Supply Voltage Range — 8 V to 35 V
Logic Supply Voltage (VCC) — 3.3 V to 5 V
Microstepping Resolution — Up to 1/8 step
MOSFET On-Resistance (HS + LS) — 0.37 Ω at 25°C
Control Interface — STEP/DIR
Decay Mode — Programmable Mixed Decay
Blanking Time — Programmable
Off Time — Programmable
Plage de température de fonctionnement — -40°C to 85°C
Lead Free Status — Lead Free
Protection Features — Overcurrent, Overtemperature, Undervoltage Lockout

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis