DRV8886ATPWPR vs DRV8886ATPWP Comparaison
Comparaison détaillée côte à côte de DRV8886ATPWPR par Texas Instruments et DRV8886ATPWP par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
DRV8886ATPWPR - 37V 2A Stepper Driver w/ AutoTune | Texas Instruments
DRV8886ATPWPR ✓ ActifTexas Instruments
DRV8886ATPWP - 37V 2A Bipolar Stepper Driver | Texas Instruments
DRV8886ATPWP ✓ ActifComparaison des spécifications
| Paramètre | DRV8886ATPWPR | DRV8886ATPWP |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Motor Drivers | Motor Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,78 | $2,04 |
| Motor Type | Bipolar stepper (2-phase) | Bipolar Stepper |
| Number of Half-Bridges | 4 (2 H-bridges) | — |
| Operating Supply Voltage (VM) | 8 V to 37 V | — |
| Maximum Full-Scale Output Current | 2 A | — |
| RMS Output Current (24 V, TA = 25 C) | 1.4 A | — |
| Logic Supply Voltage (VCC) | 3 V to 5.5 V | 3 V to 5.5 V |
| Microstepping Levels | 1, 2, 4, 8, 16, 32 (up to 1/16 native) | Full to 1/16 step |
| Current Sensing | Integrated (no external sense resistors) | — |
| Decay Mode | AutoTune (smart-tune, adaptive mixed decay) | — |
| Control Interface | STEP / DIR (indexer built-in) | STEP / DIR (Hardware GPIO) |
| RDS(on) per FET (typ) | 750 mOhm (HS + LS, TA = 25 C) per TI datasheet | — |
| Protection Features | OCP, OTP/TSD, UVLO, open-load detect, fault flag (nFAULT) | — |
| Sleep Current | [DATA_NEEDED: nSLEEP quiescent current] | 20 µA |
| Température de fonctionnement | -40 C to +125 C | — |
| Boîtier | HTSSOP-24 (PWP) with PowerPAD, 7.8 mm x 4.4 mm | HTSSOP-24 (PWP) PowerPAD |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 2 | 2 (per JEDEC J-STD-020) |
| RoHS / Pb-Free | Yes (compliant) | — |
| Number of Full H-Bridges | — | 2 |
| Load Voltage Rating (VM max) | — | 37 V |
| Minimum Operating VM | — | 8 V |
| Full-Scale Output Current | — | 2 A (per H-bridge, 25°C PCB-dependent) |
| RMS Output Current | — | 1.4 A (24 V, TA=25°C, PCB design-dependent) |
| Peak Output Current | — | 3 A |
| HS + LS On-Resistance (RDSon) | — | 550 mΩ |
| Integrated Current Sense | — | Yes (internal sense, no external resistors) |
| AutoTune / Smart Tune Decay | — | Yes |
| Decay Modes | — | Smart tune, mixed, slow, fast (programmable) |
| PWM Chopping Frequency | — | Up to 100 kHz |
| Plage de température de fonctionnement | — | -40°C to +125°C |
| Temperature Grade | — | Automotive |
| Terminal Finish | — | Nickel-Palladium-Gold |
| Peak Reflow Temperature | — | 260°C |
| Statut RoHS | — | Compliant |