DS90C032TM vs AM26LV32IDR Comparaison

Comparaison détaillée côte à côte de DS90C032TM par Texas Instruments et AM26LV32IDR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
DS90C032TM DS90C032TM - 4-Channel LVDS Receiver | Texas Instruments

DS90C032TM - 4-Channel LVDS Receiver | Texas Instruments

DS90C032TM ✓ Actif
Texas Instruments
AM26LV32IDR AM26LV32IDR - 32MHz 3.3V Quad RS-422 Receiver | TI

AM26LV32IDR - 32MHz 3.3V Quad RS-422 Receiver | TI

AM26LV32IDR ✓ Actif

Comparaison des spécifications

Paramètre DS90C032TM AM26LV32IDR
Marque Texas Instruments Texas Instruments
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Receiver Type LVDS quad CMOS differential line receiver —
Number of Receiver Channels 4 channels —
Technology LVDS BiCMOS
Process Technology CMOS —
Maximum Supported Data Rate In excess of 155.5 Mbps —
Fréquence d'horloge maximale 77.7 MHz —
Differential Input Signal Voltage 350 mV —
Output Level CMOS, TTL-compatible —
Output Control TRI-STATE —
Tension d'alimentation 5 V 3.0 V to 3.6 V
Power Dissipation Ultra-low power dissipation 27 mW
Boîtier 16-pin SOIC 16-pin SOIC, plastic MS-012AC
Type de montage Surface mount Surface mount
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] 0 C to 70 C for AM26LV32ID
Courant d'alimentation [DATA_NEEDED: supply current] —
Input Termination [DATA_NEEDED: differential input termination] —
Statut RoHS [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Status [DATA_NEEDED: AEC-Q100 qualification status] —
Device Type — Quadruple differential line receiver
Interface Standard — TIA/EIA-422-B and ITU Recommendation V.11 receiver
Nominal Supply Voltage — 3.3 V
Number of Receivers — 4
Maximum Switching Rate — 32 MHz
Architecture — BiCMOS
Type de sortie — 3-state differential receiver outputs
Enable Control — Common enable for all four receivers
Terminal Count — 16
Common-Mode Voltage Range — [DATA_NEEDED: common-mode voltage range]
Input Differential Voltage — [DATA_NEEDED: input differential voltage range]
Output High-Level Voltage — [DATA_NEEDED: output high-level voltage]
Output Low-Level Voltage — [DATA_NEEDED: output low-level voltage]
Input Current — [DATA_NEEDED: input current]
Enable Pin Levels — [DATA_NEEDED: enable input thresholds]
ESD Rating — [DATA_NEEDED: ESD rating]
MSL — Level 1, 260 C unlimited

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis