EFM32TG110F8-QFN24 vs EFM32TG110F8-D-QFN24 Comparaison

Comparaison détaillée côte à côte de EFM32TG110F8-QFN24 par Silicon Labs et EFM32TG110F8-D-QFN24 par Silicon Labs. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Silicon Labs
EFM32TG110F8-QFN24 EFM32TG110F8-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs

EFM32TG110F8-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs

EFM32TG110F8-QFN24 ✓ Actif
Silicon Labs
EFM32TG110F8-D-QFN24 EFM32TG110F8-D-QFN24 - 32MHz Cortex-M3 Tiny Gecko MCU | Silicon Labs

EFM32TG110F8-D-QFN24 - 32MHz Cortex-M3 Tiny Gecko MCU | Silicon Labs

EFM32TG110F8-D-QFN24 ✓ Actif

Comparaison des spécifications

Paramètre EFM32TG110F8-QFN24 EFM32TG110F8-D-QFN24
Marque Silicon Labs Silicon Labs
Catégorie Microcontrollers Microcontrollers
Statut du cycle de vie Actif Actif
Product Type 32-bit ARM Cortex-M3 microcontroller —
Series Tiny Gecko Tiny Gecko
Maximum CPU Frequency 32 MHz —
Core Architecture ARM Cortex-M3 —
Program Memory 8 kB Flash —
Data Memory 2 kB RAM —
Digital I/O Pins 17 17
Timers 2 x 16-bit timers 2 x 16-bit
Supply Voltage Range 1.85 V to 3.8 V —
Boîtier 24-QFN (5 x 5 mm) 24-QFN (5 x 5 mm)
Type de montage Surface mount Surface Mount
Crypto Hardware AES —
Analog Resources Operational amplifier —
Processor Performance Up to 1.25 Dhrystone MIPS/MHz —
Memory Protection Unit Up to 8 memory segments —
Low-Power Features Energy-saving modes and fast wake-up —
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Core — ARM Cortex-M3, 32-bit
Fréquence d'horloge maximale — 32 MHz
Flash Memory — 8 KB (8K x 8)
RAM (SRAM) — 2 kB
Supply Voltage Range (Vcc/Vdd) — 1.85 V to 3.8 V
Run Mode Current — 150 uA/MHz
Stop Mode Current — 0.6 uA
Security Accelerator — AES hardware accelerator
Analog Peripherals — Operational amplifier (OPAMP)
Debug Interface — 2-pin Serial Wire Debug (SWD)
Trace Interface — 1-wire Serial Wire Viewer (SWV) pin
Low-Power Modes — Deep sleep / shutoff mode with output state retention

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis