EFM32TG842F8-D-QFP64R vs EFM32TG842F32-QFP64 Comparaison

Comparaison détaillée côte à côte de EFM32TG842F8-D-QFP64R par Silicon Labs et EFM32TG842F32-QFP64 par Silicon Labs. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Silicon Labs
EFM32TG842F8-D-QFP64R EFM32TG842F8-D-QFP64R - 32MHz Cortex-M3 MCU | Silicon Labs (Tape & Reel)

EFM32TG842F8-D-QFP64R - 32MHz Cortex-M3 MCU | Silicon Labs (Tape & Reel)

EFM32TG842F8-D-QFP64R ⚠ Dernier achat
Silicon Labs
EFM32TG842F32-QFP64 EFM32TG842F32-QFP64 - 32MHz Cortex-M3 MCU | Silicon Labs

EFM32TG842F32-QFP64 - 32MHz Cortex-M3 MCU | Silicon Labs

EFM32TG842F32-QFP64 ✓ Actif

Comparaison des spécifications

Paramètre EFM32TG842F8-D-QFP64R EFM32TG842F32-QFP64
Marque Silicon Labs Silicon Labs
Catégorie Microcontrollers Microcontrollers
Statut du cycle de vie Dernier achat Actif
Product Type 32-bit ARM Cortex-M3 microcontroller 32-bit ARM Cortex-M3 Microcontroller
Series EFM32 Tiny Gecko EFM32 Tiny Gecko
Maximum CPU Frequency 32 MHz 32 MHz
Processor Core ARM Cortex-M3 ARM Cortex-M3, 32-bit RISC
Instruction Set 32-bit RISC —
Flash Memory 8 KB (8K x 8) 32 KB (32K x 8)
RAM 2 KB 4 KB
Digital I/O Pins 53 pins 53 pins
Timers 2 x 16-bit timers 2 x 16-bit timers
Tension d'alimentation de fonctionnement 1.98 V to 3.8 V —
Boîtier 64-TQFP (10 mm x 10 mm) 64-TQFP (10 x 10 mm)
Nombre de broches 64 pins —
Type de montage Surface mount Surface Mount
Peripheral I/O Configurable peripheral I/O locations —
Memory Protection Unit Up to 8 memory segments —
Wake-up Interrupt Controller Yes —
Low-Power Features Fast wake-up and energy-saving modes —
Processor Performance Up to 1.25 Dhrystone MIPS/MHz —
Statut RoHS unknown —
REACH Status unknown —
AEC-Q100 Qualification not_applicable —
Température de fonctionnement [DATA_NEEDED: operating temperature range] [DATA_NEEDED: Operating temperature range]
Flash Endurance [DATA_NEEDED: flash endurance] —
GPIO Drive Strength [DATA_NEEDED: GPIO drive strength] —
ADC — 12-bit ADC
Security Accelerator — AES hardware accelerator
Display Support — LCD controller
Supply Voltage Range — 1.85 V to 3.8 V
Run Mode Current — 150 µA/MHz
Stop Mode Current — 0.6 µA
RoHS Compliance — [DATA_NEEDED: RoHS compliance status]
Niveau MSL — [DATA_NEEDED: Moisture sensitivity level]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis