EPC1441PI8 vs EPC1441PS8 Comparaison
Comparaison détaillée côte à côte de EPC1441PI8 par Intel et EPC1441PS8 par Intel. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | EPC1441PI8 | EPC1441PS8 |
|---|---|---|
| Marque | Intel | Intel |
| Catégorie | Memory ICs | Memory ICs |
| Statut du cycle de vie | Obsolete | NRND |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $7,25 | $3,32 |
| Type de mémoire | OTP Configuration PROM | One-Time-Programmable Flash |
| Taille de mémoire | 440 kb (440,800 bits) | — |
| Configuration Interface | Serial, 4-pin (nSTATUS, nCONFIG, DCLK, DATA0) | — |
| Tension d'alimentation | 5.0 V | 3.3 V typical (compatible with Altera FPGAs) |
| Programmability | One-Time Programmable (OTP) | OTP (one-time-programmable) |
| Boîtier | 8-PDIP (8-pin Plastic DIP) | SOIC-8 (PS8, 150-mil body) |
| Type de montage | Through-Hole | Surface Mount |
| Supported FPGA Families | APEX II, APEX 20K/20KC/20KE, Mercury, ACEX 1K, FLEX 6000/10KE/10KA | — |
| Cascading Support | Yes (nCASC output for multi-device chains) | — |
| Programming Voltage | Not required (single 5.0 V supply) | — |
| Température de fonctionnement | 0C to +70C (commercial) | — |
| Lead-Free / RoHS | Not RoHS compliant (PDIP, SnPb finish) | — |
| Niveau MSL | 1 (unlimited) | — |
| Supported Configuration Modes | Passive serial (PS) only | — |
| Manufacturer | Intel (formerly Altera) | — |
| Product Type | — | Enhanced Configuration PROM (serial configuration memory) |
| Memory Density | — | 440 Kbit |
| Interface | — | 4-pin serial (nCS, OE, DATA, DCLK) |
| Compatible FPGA Families | — | APEX II, APEX 20K (including 20K, 20KC, 20KE), Mercury, ACEX 1K, FLEX 6000, FLEX 10KE, FLEX 10KA |
| Configuration Controller | — | Built-in (handles address counter, oscillator, tri-state DATA) |
| Output Driver | — | Tri-state on DATA pin |
| Configuration Speed | — | Higher DCLK rates vs legacy EPC PROMs (per Altera datasheet) |
| DC Input Absolute Min | — | -0.3 V (with -2.0 V undershoot tolerance < 20 ns) |
| DC Input Absolute Max | — | 7.0 V (with overshoot tolerance < 20 ns) |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Statut RoHS | — | unknown |