EPC2LC20 vs EPC1LI20 Comparaison
Comparaison détaillée côte à côte de EPC2LC20 par Altera et EPC1LI20 par Altera. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | EPC2LC20 | EPC1LI20 |
|---|---|---|
| Marque | Altera | Altera |
| Catégorie | Memory ICs | Memory ICs |
| Statut du cycle de vie | NRND | Obsolete |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $7,20 | $8,50 |
| Type de mémoire | Non-volatile configuration PROM | OTP Configuration PROM (EPROM-based) |
| Taille de mémoire | 1.6 Mbit | 1 Mb (1,048,576 bits) |
| Configuration Interface | Serial (x1) to FPGA via DCLK/nCONFIG/nSTATUS/CONF_DONE | Altera Passive Serial / Altera Active Serial / JTAG (IEEE 1149.1) |
| Programming Interface | IEEE 1149.1 (JTAG) ISP, 5.0-V and 3.3-V tolerant | — |
| Supply Voltage VCC | 3.0 V to 3.6 V (3.3-V operation) | — |
| ISP Voltage Range | 5.0 V or 3.3 V | — |
| Supported FPGA Families | ACEX 1K, APEX 20K/20KC/20KE, APEX II, Arria GX, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, MAX 9000 | — |
| Cascade Support | Yes - daisy-chain multiple EPC2 devices via JTAG for larger bitstreams | — |
| Boîtier | 20-pin PLCC (J-lead, 9x9 mm) | 20-pin PLCC (J-lead, 9x9 mm) |
| Type de montage | Surface Mount | Surface Mount (PLCC socket compatible) |
| Température de fonctionnement | -40C to +85C (industrial) [DATA_NEEDED: exact grade from datasheet] | [DATA_NEEDED: operating temperature range] |
| Statut RoHS | Non-Compliant (original Altera Pb-containing part) | [DATA_NEEDED: RoHS status - original Altera part may be non-RoHS SnPb finish] |
| Lead-Free Version | EPC2LC20N available as lead-free equivalent | — |
| Programming Support | Altera Programming Unit (APU), Quartus II, JTAG programmer | — |
| Boundary-Scan | IEEE 1149.1 compliant, 8-bit or 16-bit JTAG | — |
| Maximum Configuration Clock | — | 8 MHz |
| Supply Voltage (VCC) | — | 5.0 V (4.75 V to 5.25 V) |
| Programming Voltage (VPP) | — | 12.75 V (typical, factory-programmed via JTAG) |
| Nombre de broches | — | 20 |
| Cascading Support | — | Yes (nCASC pin for multi-device daisy chain) |
| Endurance | — | OTP (one-time programmable, 1000 erase-equivalent UV cycles for pre-program erase) |
| JTAG Programming | — | Yes (in-system via IEEE 1149.1) |
| Compatible FPGA Families | — | FLEX 8000, FLEX 10K, ACEX 1K, APEX 20K, Mercury |
| Niveau MSL | — | 1 (per Partstack datasheet record) |