EPC2TC32UCF48 vs EPC2T32UCAF48 Comparaison
Comparaison détaillée côte à côte de EPC2TC32UCF48 par Intel et EPC2T32UCAF48 par Intel. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | EPC2TC32UCF48 | EPC2T32UCAF48 |
|---|---|---|
| Marque | Intel | Intel |
| Catégorie | Memory ICs | Memory ICs |
| Statut du cycle de vie | NRND | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $10,85 | $10,05 |
| Type de mémoire | Non-volatile configuration PROM (CMOS Flash-based) | — |
| Memory Density | 1.6 Mbit (1.6 Mb / 32 Mbit raw) | — |
| Memory Configuration | Serial configuration bitstream storage | — |
| Supply Voltage (VCC) | 3.0 V to 3.6 V (3.3 V typical) | — |
| Supply Voltage (VCCIO) | 1.8 V / 2.5 V / 3.3 V (bank-level) | — |
| Output Drive Current (VCCIO) | [DATA_NEEDED: IOH/IOL at 3.3 V VCCIO] | — |
| Programming Interface | IEEE Std. 1149.1 JTAG (in-system programmable) | — |
| Configuration Interface | Altera serial PROM interface (DCLK, DATA, nCONFIG, nSTATUS, CONF_DONE) | — |
| Supported Configuration Modes | FPP, AS, PS, JTAG (mode dependent on target FPGA MSEL pins) | — |
| Daisy Chain Support | Yes (multi-device cascade for >16 Mbit FPGAs) | — |
| Maximum Cascaded Capacity | Up to 16 Mbit total across chain | — |
| Température de fonctionnement | 0C to +70C (commercial) | [DATA_NEEDED: operating temperature range] |
| Boîtier | 48-pin TQFP (7x7 mm) | QFP-48 (CAF48) |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL rating] |
| Statut RoHS | [DATA_NEEDED: confirm RoHS compliance] | [DATA_NEEDED: RoHS compliance] |
| Lead Free | [DATA_NEEDED: confirm lead-free] | — |
| Device Type | — | Configuration PROM for SRAM-based FPGAs |
| Memory Capacity | — | 32 Mbit |
| Interface | — | Serial / Parallel configuration; JTAG (IEEE 1149.1) ISP |
| Tension d'alimentation | — | 3.0 V to 3.6 V (3.3 V typical) |
| Configuration Modes | — | Serial, Parallel (8/16-bit) |
| JTAG Interface | — | 4-wire (TMS, TCK, TDI, TDO) |
| Cascade Support | — | Yes (nCASC pin for multi-device chains) |
| Process Technology | — | CMOS non-volatile memory |
| Manufacturer | — | Intel (formerly Altera) |
| Series | — | EPC2 (Enhanced Configuration Device) |