INA101AM vs INA101AG Comparaison
Comparaison détaillée côte à côte de INA101AM par Texas Instruments et INA101AG par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA101AM - Very High Accuracy Instrumentation Amplifier | Texas Instruments
INA101AM ✓ Actif
Comparaison des spécifications
| Paramètre | INA101AM | INA101AG |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Instrumentation Amplifier | — |
| Number of Channels | 1 channel | 1 |
| Architecture | Three precision operational amplifiers with laser-trimmed metal-film resistors | Three-op-amp, laser-trimmed metal-film resistors |
| Input Type | Differential | — |
| Supply Voltage Range | Approximately ±5 V to ±20 V; exact operating limits are [DATA_NEEDED: supply voltage range] | +/-5 V to +/-20 V |
| Maximum Supply Voltage | ±20 V | — |
| Offset Voltage | 25 mV maximum | — |
| Input Drift | 0.25 mV/°C maximum | — |
| Nonlinearity | 0.002% | — |
| Densité de bruit | 13 nV/√Hz | — |
| Common-Mode Rejection Ratio | 106 dB at 60 Hz | — |
| Input Impedance | 10 GΩ | 10^10 ohm |
| Bandwidth | Approximately 300 kHz | 300 kHz |
| Boîtier | TO-100-10 | 14-CDIP (0.300", 7.62 mm) |
| Type de montage | Through-hole | Through Hole |
| Application Areas | Strain gauges, thermocouples, RTDs, remote sensors, and general-purpose data acquisition | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Amplifier Type | — | Instrumentation Amplifier |
| Input Offset Voltage (max) | — | 25 uV |
| Offset Drift (max) | — | 0.25 uV/C |
| Nonlinearity (max) | — | 0.002% |
| Input Noise Density | — | 13 nV/rtHz |
| Common-Mode Rejection | — | 106 dB at 60 Hz |
| Slew Rate | — | 0.04 V/us |
| Température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Applications | — | Strain gages, thermocouples, RTDs, remote transducers |