INA110KUG4 vs INA110KU Comparaison
Comparaison détaillée côte à côte de INA110KUG4 par Texas Instruments et INA110KU par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA110KUG4 - 2.5 MHz Military Instrumentation Amplifier | Texas Instruments
INA110KUG4 ✓ ActifComparaison des spécifications
| Paramètre | INA110KUG4 | INA110KU |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Instrumentation Amplifier | Monolithic FET-input instrumentation amplifier |
| Number of Circuits | 1 circuit | 1 circuit |
| Gain-Bandwidth Product | 2.5 MHz | — |
| Boîtier | 16-SOIC | 16-pin SOIC (SOL-16) |
| Lead Form | Gull wing | — |
| Package Body Width | 7.50 mm | — |
| Temperature Grade | Military | — |
| Typical Dual Supply Voltage | ±15 V | — |
| Minimum Supply Voltage | [DATA_NEEDED: minimum supply voltage] | — |
| Maximum Supply Voltage | [DATA_NEEDED: maximum supply voltage] | — |
| Minimum Operating Temperature | [DATA_NEEDED: minimum operating temperature] | — |
| Maximum Operating Temperature | [DATA_NEEDED: maximum operating temperature] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 1 mV |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | [DATA_NEEDED: common-mode rejection ratio] |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 17 V/us |
| Densité de bruit | [DATA_NEEDED: noise density] | — |
| Gain Range | [DATA_NEEDED: gain range] | — |
| Type de montage | Surface mount | Surface mount |
| Statut RoHS | RoHS | unknown |
| Operating Supply Configuration | [DATA_NEEDED: operating supply configuration] | — |
| Gain Settings | — | 1, 10, 100, 200, and 500 V/V |
| Bandwidth | — | 2.5 MHz |
| Settling Time | — | 4 us to 0.01% |
| Supply Voltage Range | — | 12 V to 36 V |
| Input Impedance | — | Very high input impedance |
| Power-Supply Rejection Ratio | — | [DATA_NEEDED: power-supply rejection ratio] |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Package Width | — | 7.50 mm |
| Architecture | — | Current-feedback circuit topology |
| Input Stage | — | Laser-trimmed FET input stage |
| REACH Status | — | unknown |