INA111BU vs INA111APG4 Comparaison
Comparaison détaillée côte à côte de INA111BU par Texas Instruments et INA111APG4 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA111BU - 2 MHz FET-Input Instrumentation Amplifier | Texas Instruments
INA111BU ✓ ActifTexas Instruments
INA111APG4 - High-Speed FET-Input Instrumentation Amplifier | Texas Instruments
INA111APG4 ✓ ActifComparaison des spécifications
| Paramètre | INA111BU | INA111APG4 |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Instrumentation amplifier | — |
| Number of Amplifiers | 1 circuit | — |
| Input Transistor Type | FET-input | — |
| Gain-Bandwidth Product | 2 MHz | — |
| Slew Rate | 17 V/us | — |
| Common-Mode Rejection Ratio | 106 dB | 106 dB minimum |
| Input Bias Current | Less than 20 pA | 20 pA maximum |
| Supply Voltage Range | 6 V to 18 V | — |
| Maximum Supply Voltage | 18 V | — |
| Plage de température de fonctionnement | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Boîtier | 16-pin SOIC | 8-pin plastic DIP |
| Type de montage | Surface mount | Through-hole |
| Input Protection | [DATA_NEEDED: input protection rating] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 500 µV maximum |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | [DATA_NEEDED: output voltage swing] |
| Gain Range | [DATA_NEEDED: gain range] | — |
| Gain-Setting Resistor | [DATA_NEEDED: gain-setting resistor] | — |
| Courant de repos | [DATA_NEEDED: quiescent current] | — |
| Densité de bruit | [DATA_NEEDED: noise density] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | RoHS compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | Not applicable | — |
| Amplifier Type | — | Instrumentation amplifier |
| Number of Amplifier Circuits | — | 1 circuit |
| Internal Architecture | — | 3-op-amplifier design |
| Input Offset Voltage Drift | — | 5 µV/°C maximum |
| Bandwidth | — | 2 MHz |
| Gain | — | [DATA_NEEDED: gain range and gain-setting ratio] |
| Type de sortie | — | Single-ended |
| Tension d'alimentation | — | [DATA_NEEDED: supply voltage range] |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |