INA122PA vs AD620ANZ Comparaison
Comparaison détaillée côte à côte de INA122PA par Texas Instruments et AD620ANZ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA122PA - 60uA Micropower Instrumentation Amplifier, 36V | Texas Instruments
INA122PA ✓ ActifAnalog Devices
AD620ANZ - 1-Channel Low-Power Instrumentation Amplifier | Analog Devices
AD620ANZ UnknownComparaison des spécifications
| Paramètre | INA122PA | AD620ANZ |
|---|---|---|
| Marque | Texas Instruments | Analog Devices |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Unknown |
| Amplifier Type | Instrumentation amplifier, two-op-amp design | — |
| Number of Channels | 1 | 1 channel |
| Supply Voltage Range (Single Supply) | 2.2 V to 36 V | — |
| Supply Voltage Range (Dual Supply) | +/-18 V | — |
| Courant de repos | 60 uA | — |
| Input Offset Voltage (max) | 250 uV | — |
| Input Offset Drift (max) | 3 uV/degC | — |
| Common-Mode Rejection Ratio | 90 dB | — |
| Gain Range | 5 V/V to 10,000 V/V | 1 to 10,000 |
| Gain Bandwidth Product | 120 kHz | — |
| Input Common-Mode Range | (V-) - 0.1 V | — |
| Output Swing | Rail-to-rail | — |
| Boîtier | 8-pin PDIP (P) | 8-lead PDIP |
| Type de montage | Through-hole | Through-hole |
| Supply Type | Single or dual supply operation | — |
| Input Noise | [DATA_NEEDED: input noise specification] | [DATA_NEEDED: input noise] |
| Slew Rate | [DATA_NEEDED: slew rate specification] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Statut RoHS | [DATA_NEEDED: RoHS status] | unknown |
| Product Type | — | Low-cost, low-power, high-accuracy instrumentation amplifier |
| External Gain Setting | — | One external resistor |
| Gain-Bandwidth Product | — | 1 MHz |
| Maximum Supply Current | — | 1.3 mA |
| Tension d'alimentation | — | [DATA_NEEDED: supply voltage range] |
| Input Bias Current | — | 2 nA |
| Common-Mode Rejection | — | 110 dB |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Package Family | — | PDIP family, through-hole DIP |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |
| Applications | — | Precision data acquisition, sensor conditioning, portable instrumentation |