INA122PA vs AD623ARZ-R7 Comparaison
Comparaison détaillée côte à côte de INA122PA par Texas Instruments et AD623ARZ-R7 par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA122PA - 60uA Micropower Instrumentation Amplifier, 36V | Texas Instruments
INA122PA ✓ ActifComparaison des spécifications
| Paramètre | INA122PA | AD623ARZ-R7 |
|---|---|---|
| Marque | Texas Instruments | Analog Devices |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Prix unitaire (USD) | — | $2,65 |
| Amplifier Type | Instrumentation amplifier, two-op-amp design | Instrumentation Amplifier |
| Number of Channels | 1 | — |
| Supply Voltage Range (Single Supply) | 2.2 V to 36 V | — |
| Supply Voltage Range (Dual Supply) | +/-18 V | — |
| Courant de repos | 60 uA | — |
| Input Offset Voltage (max) | 250 uV | — |
| Input Offset Drift (max) | 3 uV/degC | — |
| Common-Mode Rejection Ratio | 90 dB | — |
| Gain Range | 5 V/V to 10,000 V/V | 1 to 1000+ |
| Gain Bandwidth Product | 120 kHz | — |
| Input Common-Mode Range | (V-) - 0.1 V | Extends 150 mV below ground (single supply) |
| Output Swing | Rail-to-rail | — |
| Boîtier | 8-pin PDIP (P) | 8-SOIC (0.154 in, 3.90 mm width) |
| Type de montage | Through-hole | Surface Mount |
| Supply Type | Single or dual supply operation | — |
| Input Noise | [DATA_NEEDED: input noise specification] | — |
| Slew Rate | [DATA_NEEDED: slew rate specification] | 0.3 V/us |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| Number of Circuits | — | 1 |
| Supply Voltage Range (Single) | — | 2.7 V to 12 V |
| Supply Voltage Range (Dual) | — | +/-2.5 V to +/-6 V |
| Type de sortie | — | Rail-to-Rail |
| 3 dB Bandwidth | — | 800 kHz |
| CMRR | — | 90 dB (min) at G = 1 |
| Gain Setting | — | Single external resistor, G = 1 + 100 kOhm/RG |
| Température de fonctionnement | — | -40C to +85C |
| Packaging | — | Tape & Reel (R7) |
| Grade | — | A grade (B grade offers lower offset/drift) |