INA125UA vs INA125U Comparaison

Comparaison détaillée côte à côte de INA125UA par Texas Instruments et INA125U par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
INA125UA INA125UA - Precision Bridge Instrumentation Amplifier | TI

INA125UA - Precision Bridge Instrumentation Amplifier | TI

INA125UA ✓ Actif

Comparaison des spécifications

Paramètre INA125UA INA125U
Marque Texas Instruments Texas Instruments
Catégorie Amplifier ICs Amplifier ICs
Statut du cycle de vie Actif Actif
Product Type Instrumentation amplifier with precision voltage reference Instrumentation amplifier with precision voltage reference
Number of Channels 1 circuit —
Gain Range 4 V/V to 10,000 V/V 4 V/V to 10,000 V/V
Gain Setting Method 1 external resistor —
Supply Voltage Range 2.7 V to 36 V 2.7 V to 36 V
Maximum Input Offset Voltage 250 uV —
Input Type Differential input —
Reference Integrated precision voltage reference —
Bridge Excitation Integrated bridge excitation —
Trim Method Laser trimmed —
Boîtier 16-pin SOIC 16-pin SOIC
Type de montage Surface mount Surface mount
Maximum Supply Voltage 36 V 36 V
Minimum Supply Voltage 2.7 V —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] —
Input Noise at 1 kHz [DATA_NEEDED: input noise at 1 kHz] —
Tension de référence [DATA_NEEDED: precision reference voltage] —
Common-Mode Input Range [DATA_NEEDED: common-mode input voltage range] —
Plage de tension de sortie [DATA_NEEDED: output voltage range] —
Statut RoHS [DATA_NEEDED: RoHS compliance status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance status] [DATA_NEEDED: REACH status]
Channel Count — 1 circuit
Gain Setting — Single external resistor
Courant de repos — 460 µA
Input Offset Voltage — 250 µV maximum
Input Offset Drift — 2 µV/°C maximum
Voltage Reference — 10 V
Gain Error — [DATA_NEEDED: gain error]
Common-Mode Rejection — [DATA_NEEDED: common-mode rejection ratio]
Input Bias Current — [DATA_NEEDED: input bias current]
Bandwidth — 150 kHz
Noise at 1kHz — 38 nV/√Hz typical
Slew Rate — [DATA_NEEDED: slew rate]
Sleep Mode — Yes
Température de fonctionnement — [DATA_NEEDED: operating temperature range]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis