INA126U vs INA126UA Comparaison
Comparaison détaillée côte à côte de INA126U par Texas Instruments et INA126UA par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA126UA - 36V Precision MicroPower Instrumentation Amplifier | TI
INA126UA ✓ ActifComparaison des spécifications
| Paramètre | INA126U | INA126UA |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Device Type | Single-circuit micropower precision instrumentation amplifier | — |
| Maximum Total Supply Voltage | 36 V | — |
| Operating Supply Range | ±1.35 V to ±18 V | — |
| Courant de repos | 175 µA per channel | 175 µA per channel |
| Offset Voltage | 250 µV | — |
| Architecture | Two-op-amp design | Two-op-amp instrumentation amplifier |
| Circuit Count | 1 amplifier | — |
| Signal Type | Differential signal acquisition | Differential input, single-ended output |
| Gain Configuration | External gain-setting resistor | External resistor configuration |
| Boîtier | 8-pin SOIC, 3.90 mm width | 8-pin SOIC |
| Type de montage | Surface mount | Surface mount |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Gain-Bandwidth Product | [DATA_NEEDED: gain-bandwidth product] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Maximum Differential Input Voltage | [DATA_NEEDED: maximum differential input voltage] | — |
| Noise Voltage Density | [DATA_NEEDED: noise voltage density] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Amplifier Type | — | Single-channel precision instrumentation amplifier |
| Number of Channels | — | 1 channel |
| Maximum Supply Voltage | — | 36 V |
| Minimum Total Supply Voltage | — | 2.7 V |
| Dual-Supply Operating Range | — | ±1.35 V to ±18 V |
| Input Offset Voltage | — | 250 µV maximum |
| Gain Bandwidth | — | 200 kHz |
| Common-Mode Rejection Ratio | — | 74 dB minimum |
| Application Category | — | Low-noise differential signal acquisition |
| AEC-Q100 Qualification | — | unknown |