INA128HD vs INA141U Comparaison
Comparaison détaillée côte à côte de INA128HD par Texas Instruments et INA141U par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA141U - Precision Low-Power Instrumentation Amplifier | Texas Instruments
INA141U UnknownComparaison des spécifications
| Paramètre | INA128HD | INA141U |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Unknown |
| Amplifier Type | Precision instrumentation amplifier | — |
| Number of Channels | 1 channel | — |
| Common-Mode Rejection Ratio | 130 dB | — |
| Common-Mode Rejection Ratio at Gain 100 or Higher | 93 dB minimum | — |
| Typical Offset Voltage | 25 µV | — |
| Typical Input Bias Current | 50 nA | — |
| Gain Range | 1 to 10,000 V/V | — |
| Gain-Bandwidth Product | 1.3 MHz | — |
| Slew Rate | 4 V/µs | — |
| Typical Quiescent Current | 700 µA | — |
| Supply Voltage Range | 4.5 V to 36 V total, equivalent to ±18 V | — |
| Maximum Input Protection Range | ±40 V | — |
| Gain-Setting Resistor | 49.4 kΩ | — |
| Boîtier | 8-pin SOIC, 0.154 inch body width, 3.90 mm | 8-pin SOIC |
| Type de montage | Surface mount | — |
| Packaging | Bulk | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Product Type | — | Precision, low-power instrumentation amplifier |
| Architecture | — | Three-op-amp instrumentation amplifier |
| Gain | — | 10 V/V or 100 V/V |
| Gain Accuracy | — | ±0.05% at G = 10 |
| Offset Voltage | — | 50 µV maximum |
| Offset Drift | — | 0.5 µV/°C maximum |
| Input Bias Current | — | 5 nA maximum |
| Common-Mode Rejection | — | 117 dB minimum |
| Input Protection | — | ±40 V |
| Supply Range | — | ±18 V |
| Bandwidth | — | 200 kHz at G = 100 V/V |
| Courant de repos | — | 750 µA maximum |
| Température de fonctionnement | — | −40°C to +85°C |
| Statut RoHS | — | Green product; no Sb/Br |
| Input Protection Class | — | Differential and common-mode inputs protected to ±40 V |