INA128P vs INA118PB Comparaison
Comparaison détaillée côte à côte de INA128P par Texas Instruments et INA118PB par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA118PB - Precision Instrumentation Amplifier | Texas Instruments
INA118PB ✓ ActifComparaison des spécifications
| Paramètre | INA128P | INA118PB |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Precision instrumentation amplifier | Precision instrumentation amplifier |
| Architecture | Three-op-amp instrumentation amplifier | Three-op-amp design |
| Common-Mode Rejection Ratio | 130 dB minimum | — |
| Offset Voltage | 50 µV maximum | — |
| Offset Voltage Drift | 0.5 µV/°C maximum | — |
| Input Bias Current | 5 nA maximum | — |
| Input Protection | ±40 V | — |
| Supply Voltage Range | ±2.25 V to ±18 V | — |
| Courant de repos | 700 µA | 350 uA |
| Bandwidth | 1.3 MHz | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Slew Rate | 4 V/µs | — |
| Boîtier | 8-pin plastic DIP (PDIP) | 8-pin plastic DIP |
| Température de fonctionnement | -40 °C to +85 °C | — |
| Input Type | Differential input | — |
| Manufacturer | Texas Instruments | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| Number of Amplifiers | — | 1 circuit |
| Maximum Offset Voltage | — | 50 uV |
| Maximum Offset Voltage Drift | — | 0.5 uV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Minimum Common-Mode Rejection | — | 110 dB at G = 1000 |
| Maximum Input Voltage | — | ±40 V |
| Maximum Supply Voltage | — | ±18 V |
| Minimum Single-Supply Voltage | — | 1.35 V |
| Minimum Dual-Supply Voltage | — | ±2.25 V |
| Gain Range | — | 1 to 10,000 |
| Bandwidth at Gain of 100 | — | 70 kHz |
| Plage de température de fonctionnement | — | -40°C to +85°C |
| Type de montage | — | Through-hole |