INA128P vs INA141PA Comparaison
Comparaison détaillée côte à côte de INA128P par Texas Instruments et INA141PA par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA141PA - Precision 10/100 V/V Instrumentation Amplifier | Texas Instruments
INA141PA ✓ ActifComparaison des spécifications
| Paramètre | INA128P | INA141PA |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Precision instrumentation amplifier | Precision instrumentation amplifier |
| Architecture | Three-op-amp instrumentation amplifier | Three-op-amp instrumentation amplifier |
| Common-Mode Rejection Ratio | 130 dB minimum | — |
| Offset Voltage | 50 µV maximum | 50 µV maximum |
| Offset Voltage Drift | 0.5 µV/°C maximum | — |
| Input Bias Current | 5 nA maximum | 5 nA maximum |
| Input Protection | ±40 V | ±40 V |
| Supply Voltage Range | ±2.25 V to ±18 V | — |
| Courant de repos | 700 µA | [DATA_NEEDED: quiescent current] |
| Bandwidth | 1.3 MHz | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Slew Rate | 4 V/µs | — |
| Boîtier | 8-pin plastic DIP (PDIP) | 8-pin plastic DIP |
| Température de fonctionnement | -40 °C to +85 °C | -40 °C to +85 °C |
| Input Type | Differential input | — |
| Manufacturer | Texas Instruments | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Gain | — | 10 V/V or 100 V/V |
| Supply Range | — | ±18 V |
| Offset Drift | — | 0.5 µV/°C maximum |
| Common-Mode Rejection | — | 117 dB minimum |
| Bandwidth at Gain 100 V/V | — | 200 kHz |
| Type de montage | — | Through-hole |
| Number of Circuits | — | 1 circuit |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |