INA128PA vs INA129P Comparaison
Comparaison détaillée côte à côte de INA128PA par Texas Instruments et INA129P par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | INA128PA | INA129P |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Precision instrumentation amplifier | Precision low-power instrumentation amplifier |
| Architecture | Three-op-amp instrumentation amplifier | Three-op-amp instrumentation-amplifier design |
| Number of Circuits | 1 circuit | — |
| Boîtier | 8-pin PDIP | 8-pin plastic DIP (PDIP) |
| Common-Mode Rejection Ratio | 130 dB | — |
| Minimum Common-Mode Rejection | 120 dB | 120 dB |
| Courant de repos | 700 µA | — |
| Maximum Input Offset Voltage | 50 µV | — |
| Maximum Input Voltage Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | 5 nA |
| Input Protection | ±40 V | ±40 V |
| Supply Range | Up to ±18 V | — |
| Gain Range | 1 to 10,000 | 1 to 10,000 |
| Gain Setting | Single external resistor | — |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Green Product | Yes | — |
| Restricted Substances | No Sb/Br | — |
| Température de fonctionnement | -40°C to +85°C | — |
| Type de montage | Through-hole | Through-hole |
| Amplifier Circuit Count | — | 1 |
| Maximum Offset Voltage | — | 50 uV |
| Maximum Offset Drift | — | 0.5 uV/°C |
| Supply Voltage Range | — | ±18 V |
| Gain Adjustment | — | Single external resistor |
| Temperature Range | — | -40°C to +85°C |
| Low-Power Feature | — | Low-power instrumentation-amplifier design |
| Current Feedback | — | Yes |
| Statut RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |