INA128U vs INA121U Comparaison
Comparaison détaillée côte à côte de INA128U par Texas Instruments et INA121U par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA121U - Low-Power FET Instrumentation Amplifier | Texas Instruments
INA121U UnknownComparaison des spécifications
| Paramètre | INA128U | INA121U |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Unknown |
| Device Type | Precision low-power instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | Three-op-amp instrumentation-amplifier design |
| Number of Amplifiers | 1 amplifier | — |
| Common-Mode Rejection Ratio | 130 dB | — |
| Minimum Common-Mode Rejection Ratio | 120 dB | — |
| Courant de repos | 700 µA | ±450 µA |
| Maximum Input Offset Voltage | 50 µV | — |
| Maximum Input Offset Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Input Protection Range | ±40 V | — |
| Supply Voltage Range | ±2.25 V to ±18 V | — |
| Gain Range | 1 to 100,000 | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Maximum Slew Rate | 4 V/µs | — |
| Maximum Gain-Bandwidth Product | 1.3 MHz | — |
| Boîtier | 8-pin SOIC | 8-pin SOIC |
| Type de montage | Surface mount | Surface mount |
| Plage de température de fonctionnement | -40°C to +85°C | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Product Type | — | FET-input, low-power instrumentation amplifier |
| Number of Channels | — | 1 circuit |
| Input Bias Current | — | ±4 pA |
| Input Offset Voltage | — | ±200 µV |
| Input Offset Drift | — | ±2 µV/°C |
| Input Noise | — | 100 nV/√Hz |
| Common-Mode Rejection | — | 106 dB |
| Supply Range | — | ±2.25 V to ±18 V |
| Bandwidth | — | 600 kHz |
| Nonlinearity Error | — | 0.001% |
| Température de fonctionnement | — | -40 °C to +85 °C |
| Application Category | — | Instrumentation amplifier |
| Input Type | — | Differential input |
| Manufacturer | — | Texas Instruments |