INA128UG4 vs INA129UA Comparaison
Comparaison détaillée côte à côte de INA128UG4 par Texas Instruments et INA129UA par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA129UA - Precision Instrumentation Amplifier | Texas Instruments
INA129UA ✓ ActifComparaison des spécifications
| Paramètre | INA128UG4 | INA129UA |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | Precision instrumentation amplifier | Precision instrumentation amplifier |
| Number of Circuits | 1 circuit | — |
| Common-Mode Rejection Ratio | 130 dB | 120 dB minimum |
| Courant de repos | 700 uA | — |
| Gain-Bandwidth Product | 1.3 MHz | — |
| Input Offset Voltage | 10 uV | 50 µV maximum |
| Input Noise Density | 8 nV/sqrt(Hz) | — |
| Slew Rate | 4 V/us | — |
| Supply Voltage Range | ±2.25 V to ±18 V | ±18 V maximum |
| Typical Supply Voltage | ±15 V | — |
| Boîtier | 8-pin SOIC, 3.90 mm body width | 8-pin SOIC (D) |
| Type de montage | Surface mount | Surface mount |
| Nombre de broches | 8 pins | — |
| Gain Configuration | External gain-setting resistor | — |
| Input Type | Differential | — |
| Product Description | Precision, low-power instrumentation amplifier | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40 °C to +125 °C |
| Number of Amplifier Circuits | — | 1 circuit |
| Input Offset Voltage Drift | — | 0.5 µV/°C maximum |
| Input Bias Current | — | 5 nA maximum |
| Input Protection Range | — | ±40 V |
| Minimum Total Supply Voltage | — | 4.5 V |
| Maximum Gain | — | 10,000 V/V |
| Minimum Gain | — | 1 V/V |
| Gain Setting | — | Single external resistor |
| Bandwidth at Gain 100 | — | 200 kHz |
| Input Noise at 1 kHz | — | 8 nV/√Hz typical |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |