INA132UA vs INA166UA Comparaison
Comparaison détaillée côte à côte de INA132UA par Texas Instruments et INA166UA par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA166UA - G=2000 Low-Noise Instrumentation Amplifier | TI
INA166UA ⚠ Dernier achatComparaison des spécifications
| Paramètre | INA132UA | INA166UA |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Dernier achat |
| Product Type | Low-power, unity-gain difference amplifier | 1 circuit instrumentation amplifier |
| Number of Channels | 1 channel | — |
| Gain | 1 V/V (unity gain) | — |
| Single-Supply Voltage Range | Up to 36 V | — |
| Dual-Supply Voltage Range | ±18 V | — |
| Courant de repos | 160 uA | — |
| Gain-Bandwidth Product | 300 kHz | — |
| Input Offset Voltage | 500 uV maximum | 50 µV |
| Gain Error | ±0.075% maximum | — |
| Nonlinearity | 0.001% maximum | — |
| Common-Mode Rejection | 90 dB minimum | — |
| Slew Rate | 100 mV/us minimum | 15 V/µs |
| Plage de température de fonctionnement | -55°C to +125°C | — |
| Boîtier | 8-pin SOIC | SOIC-14 (D) |
| Type de montage | Surface mount | Surface mount |
| Internal Gain Resistors | Laser trimmed | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Internal Gain | — | 2000 V/V |
| External Gain Resistor | — | Not required |
| -3 dB Bandwidth | — | 450 kHz |
| Input Bias Current | — | 2.5 µA |
| Architecture | — | Current-feedback |
| Number of Circuits | — | 1 circuit |
| Nombre de broches | — | 14 pins |
| Température de fonctionnement | — | -40 °C to +85 °C |
| Signal Type | — | Low-level differential input |
| Type de sortie | — | Single-ended instrumentation-amplifier output |
| Input Common-Mode Rejection | — | [DATA_NEEDED: input common-mode rejection ratio] |
| Densité de bruit | — | [DATA_NEEDED: input noise density] |
| Tension d'alimentation | — | [DATA_NEEDED: supply-voltage range] |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |