INA141PA vs INA128P Comparaison
Comparaison détaillée côte à côte de INA141PA par Texas Instruments et INA128P par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA141PA - Precision 10/100 V/V Instrumentation Amplifier | Texas Instruments
INA141PA ✓ ActifComparaison des spécifications
| Paramètre | INA141PA | INA128P |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Precision instrumentation amplifier | Precision instrumentation amplifier |
| Gain | 10 V/V or 100 V/V | — |
| Architecture | Three-op-amp instrumentation amplifier | Three-op-amp instrumentation amplifier |
| Input Protection | ±40 V | ±40 V |
| Supply Range | ±18 V | — |
| Offset Voltage | 50 µV maximum | 50 µV maximum |
| Offset Drift | 0.5 µV/°C maximum | — |
| Input Bias Current | 5 nA maximum | 5 nA maximum |
| Common-Mode Rejection | 117 dB minimum | — |
| Bandwidth at Gain 100 V/V | 200 kHz | — |
| Courant de repos | [DATA_NEEDED: quiescent current] | 700 µA |
| Température de fonctionnement | -40 °C to +85 °C | -40 °C to +85 °C |
| Boîtier | 8-pin plastic DIP | 8-pin plastic DIP (PDIP) |
| Type de montage | Through-hole | — |
| Number of Circuits | 1 circuit | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Common-Mode Rejection Ratio | — | 130 dB minimum |
| Offset Voltage Drift | — | 0.5 µV/°C maximum |
| Supply Voltage Range | — | ±2.25 V to ±18 V |
| Bandwidth | — | 1.3 MHz |
| Bandwidth at Gain 100 | — | 200 kHz |
| Slew Rate | — | 4 V/µs |
| Input Type | — | Differential input |
| Manufacturer | — | Texas Instruments |