INA141UAG4 vs INA141UAE4 Comparaison
Comparaison détaillée côte à côte de INA141UAG4 par Texas Instruments et INA141UAE4 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA141UAG4 - 1 MHz Instrumentation Amplifier | Texas Instruments
INA141UAG4 ObsoleteTexas Instruments
INA141UAE4 - Precision Gain-10/100 Instrumentation Amplifier | TI
INA141UAE4 ✓ ActifComparaison des spécifications
| Paramètre | INA141UAG4 | INA141UAE4 |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Obsolete | Actif |
| Product Type | Precision low-power instrumentation amplifier | — |
| Amplifier Count | 3 amplifiers | — |
| Gain | 10 or 100 | — |
| Bandwidth | 1 MHz | — |
| Common-Mode Rejection Ratio | 110 dB | — |
| Input Offset Voltage | 20 µV | — |
| Input Offset Voltage, Datasheet Listing | 250 µV | — |
| Input Noise Density | 8 nV/√Hz | — |
| Type de sortie | Single-ended | — |
| Boîtier | 8-SOIC, 0.154 inch body width, 3.90 mm width | 8-pin SOIC |
| Type de montage | Surface mount | Surface mount |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 2.25 V to 18 V |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Plage de tension de sortie | [DATA_NEEDED: output voltage range] | — |
| Courant d'alimentation | [DATA_NEEDED: typical supply current] | — |
| Courant de repos | [DATA_NEEDED: quiescent current] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 4 V/µs |
| Gain Bandwidth Product | [DATA_NEEDED: gain-bandwidth product] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| Amplifier Type | — | Precision instrumentation amplifier |
| Architecture | — | Three-op-amp design |
| Fixed Gain | — | 100 V/V |
| Maximum Input Voltage | — | 250 V |
| Bandwidth at Gain 100 | — | 200 kHz |
| Input Circuitry | — | Current-feedback |
| Power Class | — | Low-power |
| Number of Circuits | — | 1 circuit |
| Terminal Count | — | 8 terminals |
| Package Shape | — | Rectangular |
| Terminal Form | — | Gull wing |
| Temperature Grade | — | Industrial |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |