INA2141U vs INA2141UG4 Comparaison
Comparaison détaillée côte à côte de INA2141U par Texas Instruments et INA2141UG4 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA2141U - Dual 100V/µs Instrumentation Amplifier | Texas Instruments
INA2141U ✓ ActifComparaison des spécifications
| Paramètre | INA2141U | INA2141UG4 |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Number of Channels | 2 channels | 2 channels |
| Device Type | Dual instrumentation amplifier | — |
| Selectable Gain | 10 or 100 | — |
| Gain-Bandwidth Product | 1 MHz | — |
| Slew Rate | 4 V/µs | 1 V/us |
| Input Offset Voltage | 50 µV maximum | — |
| Input Offset Voltage Drift | 0.5 µV/°C maximum | 500 nV/°C |
| Gain Error | ±0.05% maximum | — |
| Input Bias Current | 5 nA maximum | 5 nA |
| Common-Mode Rejection Ratio | 117 dB minimum | — |
| Input Protection Range | ±40 V | — |
| Supply Voltage Range | ±2.25 V to ±18 V | — |
| Boîtier | 16-pin SOIC (DW) | 16-pin SOIC, 300 mil |
| Type de montage | Surface mount | Surface mount |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| Courant de repos | [DATA_NEEDED: quiescent current] | — |
| Product Type | — | Dual instrumentation amplifier |
| Amplifier Architecture | — | 3-op-amp instrumentation amplifier per channel |
| Gain Options | — | 10 or 100 V/V |
| Bandwidth at Gain 100 | — | 200 kHz |
| Signal-to-Noise Ratio | — | 117 dB |
| Courant d'alimentation | — | 15 mA |
| Maximum Output Error | — | 50 uV |
| Output Current | — | 750 uA |
| Tension d'alimentation | — | 5 V |
| Gain Resistors | — | Integrated; external feedback resistors not required |
| Input Circuitry | — | Current-feedback |