IRS10752LTRPBF vs BTS4130QGAXUMA1 Comparaison
Comparaison détaillée côte à côte de IRS10752LTRPBF par Infineon et BTS4130QGAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | IRS10752LTRPBF | BTS4130QGAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,32 | $1,86 |
| Driver Configuration | High-Side, Single Channel | — |
| Number of Drivers | 1 | — |
| Logic Type | Non-Inverting | — |
| Maximum Offset Voltage | 100 V | — |
| Source Current (typ) | 0.16 A | — |
| Sink Current (typ) | 0.24 A | — |
| Supply Voltage (VCC) | 10 V to 20 V | — |
| Input Voltage (IN) | 0 V to VCC | — |
| Propagation Delay (typ) | [DATA_NEEDED: propagation delay ns] | — |
| Rise Time (typ) | [DATA_NEEDED: rise time ns] | — |
| Fall Time (typ) | [DATA_NEEDED: fall time ns] | — |
| Plage de température de fonctionnement | -40C to +125C | -40 C to +150 C junction |
| Boîtier | PG-SOT23-6 (6-pin) | PG-DSO-20-32 (20-pin DSO, 7.50 mm width) |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 1 | 3 (per JEDEC J-STD-020) |
| Lead-Free / RoHS | Yes (TRPBF suffix = Pb-free tape & reel) | — |
| Target Transistor Type | IGBTs and MOSFETs | — |
| Product Type | — | Quad Smart High-Side Power Switch |
| Number of Channels | — | 4 |
| Topologie | — | High-Side N-Channel MOSFET with charge pump |
| Continuous Load Current per Channel | — | 2.1 A |
| On-State Resistance R_DS(on) per Channel | — | 130 mOhm typical |
| Tension d'alimentation de fonctionnement | — | 6 V to 18 V (extended to 28 V transient) |
| Overvoltage Clamp (Load Dump) | — | 45 V typical |
| Quiescent Current (Standby) | — | [DATA_NEEDED: quiescent current value] |
| Automotive Qualification | — | AEC-Q100 qualified |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage clamp, reverse battery |
| Diagnostic Output | — | Status feedback pin |
| Statut RoHS | — | Compliant |